-
Updating the vCenter Server Appliance
December 21, 2019
The vCenter Server Appliance (VCSA), like all software, receives updates. The VCSA makes it drop-dead simple to update. Before you start, the first thing to do is to back up the VCSA. After you have a backup, you can continue with the update.
In the left pane, click Update, as shown in Figure 1.
Figure 1 As noted on the Update screen, VCSA updates are cumulative.
Select the most recent update available and click STAGE AND INSTALL, as shown in Figure 2.
Figure 2 Select I accept the terms of the license agreement and click Next, as shown in Figure 3.
Figure 3 Select I have backed up vCenter Server and its associated databases and click Finish, as shown in Figure 4. I know you are not going to lie, you did a backup first, right?
Figure 4 The Staging and Installation begin, as shown in Figure 5.
Figure 5 After about 10 to 20 minutes, you should be able to log in to the VCSA appliance management interface. The Installation shows success, as shown in Figure 6. Click Close.
Figure 6 On the Update screen, you will see the VCSA’s current version and no Available updates, as shown in Figure 7.
Figure 7 You can configure the VCSA to automatically check for updates.
Click SETTINGS, as shown in Figure 8.
Figure 8 Select Check for updates automatically, enter the update check frequency, and click Save, as shown in Figure 9.
Figure 9 The only way to see the automatic check for updates schedule is to go back into SETTINGS.
Exit the VCSA management interface.
About Carl Webster
Carl Webster is an independent consultant specializing in Citrix, Active Directory, and technical documentation. Carl (aka “Webster”) serves the broader Citrix community by writing articles (see CarlWebster.com) and by being the most active person in the Citrix Zone on Experts Exchange. Webster has a long history in the IT industry beginning with mainframes in 1977, PCs and application development in 1986, and network engineering in 2001. He has worked with Citrix products since 1990 with the premiere of their first product – the MULTIUSER OS/2.
View all posts by Carl WebsterSubscribe
Subscribe to our e-mail newsletter to receive updates.
2 Responses to “Updating the vCenter Server Appliance”
Leave a Reply to MKC
January 27, 2020 at 6:02 pm
Do we have to update the Certs on Xenapp (7.x) every time VCSA is updated ?
January 30, 2020 at 2:43 pm
As long as the certificate is still valid AND the VCSA name has not changed, you should not have to do anything in Studio. I have not had to do anything in Studio.
Webster