A customer site I was at recently needed their XenApp 5 farm documented. I remembered reading about Citrix having some PowerShell “stuff” for XenApp 5 so I started searching. I came across a short article by Michael Bogobowicz Getting a Farm Inventory With XenApp 6 PowerShell Scripting. That short article really piqued my interest. I took Michael’s little script as the starting point to learn Microsoft’s PowerShell. With some help from PowerShell MVP and fellow CTP Brandon Shell and a lot of help from Exchange MVP Michael B. Smith, I turned the original script into over 2000 lines of PowerShell to thoroughly document a XenApp 5 farm.

NOTE: This script is continually updated.  You can always find the most current version by going to https://carlwebster.com/where-to-get-copies-of-the-documentation-scripts/

This article will focus only on XenApp 5. There is already an article for XenApp 6 and there will be an article for XenApp 6.5.

The prerequisites to follow along with this article are:

• A server, physical or virtual, running Microsoft Windows Server 2003 or Windows Server 2008
• Citrix XenApp 5 for Windows Server 2003 or Windows Server 2008 installed

My lab for this article consists of:

• Windows Server 2008 R2 Domain Controller
• Windows Server 2008 R2 SQL Server
• Windows Server 2003 Standard 32-bit with XenApp 5 and HRP7
• Windows Server 2003 Standard 64-bit with XenApp 5 and HRP7
• Windows Server 2008 Standard 32-bit with XenApp 5 and HRP1
• Windows Server 2008 Standard 64-bit with XenApp 5 and HRP1

The two different XenApp 5 versions are in their own XenApp farm.

In this article, we will be installing the Citrix XenApp Commands Technology Preview (v3).

My initial goal was to see if I could walk down the nodes in the Delivery Services Console (Figure 1), or the Access Management Console (Figure 2), and see if I could document every nook and cranny.

Before we can start using PowerShell to document anything in the XenApp 5 farms we first need to install the XenApp Commands Technology Preview (v3). From your XenApp 5 server, go to https://carlwebster.sharefile.com/d-sfef39096d924298b (Figure 3). Note: A MyCitrix.com login is required.

Click on Download and extract the file to C:\XA5CTP. You can now close your Internet browser.

For a 32-bit server, click Start, Run, type in C:\XA5CTP\Citrix.XenApp.Commands\Citrix.XenApp.Commands.Install_x86.msi and press Enter.

For a 64-bit server, click Start, Run, type in C:\XA5CTP\Citrix.XenApp.Commands\Citrix.XenApp.Commands.Install_x64.msi and press Enter.

Click Run (Figure 4).

Select I accept the terms of this license agreement and click Install (Figure 5).

After a few seconds, the installation completes. Click Finish (Figure 6).

You now have new Start Menu items under All Programs, Citrix. Windows Server 2003 is shown in and Windows Server 2008 is shown in.

The menu item that says Windows PowerShell with XenApp Commands (CTP3) will be the one we use for this article. Click Start, All Programs, Citrix, XenApp Commands, Windows PowerShell with XenApp Commands (CTP3). A PowerShell session starts with the Citrix PowerShell modules already loaded.

Everything is now set up for us to get started. Returning back to Michael Bogobowicz’s script, I didn’t need any of the e-mail stuff so I removed all that, which left the following:

$farm = Get-XAFarm  #Gets the farm information
$applications = Get-XAApplication  #Gets the published applications
$servers = Get-XAServer  #Gets the XA servers in the farm
#Prepares the output
$output = "Farm: "+$farm.FarmName + "`n"
$output += "`nServers `n"
foreach($server in $servers){
   $output+=$server.ServerName + " ("+$server.CitrixEdition+" "+$server.CitrixVersion+")`n"
}
$output += "`nApplications `n"
foreach($application in $applications){
   $output+=$application.DisplayName + " ("+$application.ApplicationType+")`n"
}
echo $output

Note: To save a lot of typing, I will refer to XenApp 5 for Windows Server 2003 as XA503 and XenApp 5 for Windows Server 2008 as XA508.

Pasting that into the PowerShell session, gave me what is shown in Figure 9 for XA503 and Figure 10 for XA508.

Next, I wanted to know all the information I could get. The XenApp Commands Quick Start Guide says to get a listing of the available XenApp commands to enter the following command:

Get-Command --Module Citrix* | Sort Noun, Verb | Select Name

Typing that line into the PowerShell session returns a long list of Citrix PowerShell commands. A sample is shown in Figure 11.

PowerShell commands are done in a Verb-Noun format. Get-Something, New-Something, Copy-Something, etc. I don’t want to change anything in my script, I just want to get, or retrieve, all the farm information possible. So how can I get a list of just the “Get” Citrix PowerShell commands, showing just the name, in alphabetical order? Being a good PowerShell citizen, Citrix puts “XA” or “Ctx” at the beginning of their Get commands.

To get a list of the Get commands, showing just the Name, where the noun starts with “XA”, type the following in the PowerShell session (results are shown in Figure 12):

Get-Command --Noun XA* -Verb Get | Select-Object Name

Note: I figured out the commands I needed based on an e-mail from Brandon Shell and then typing help get-command –full. Looking at the examples in the help showed me the –Noun and –Verb parameters. My friend Michael B. Smith showed me how to retrieve just the Name column by using Select-Object Name. I did not have to sort the results as help told me that Get-Command returns the results in alphabetical order.

Looking at Michael’s Bogobowicz’s script, I can see the pieces of information being returned.

1. The farm name
2. Each server’s name, product edition, and product version
3. Each application’s name and application type.

Typing the commands into the XA503 PowerShell session gave me the results shown in Figure 13 and Figure 14.

My next question was how do I find out what information each command returns for me to use? That information is contained in the CTP3 Help file. Click Start, All Programs, Citrix, XenApp Commands, XenApp Commands (CTP3) Help. XA503 is shown in Figure 15 and XA508 is shown in Figure 16.

The Citrix XenApp Commands Reference help opens (Figure 17).

Double-click Commands (Figure 18).

Scroll down and click on Get-XAServer (Figure 19).

In the right pane, scroll down until you see the Return Type section (Figure 20).

You see where the Return Type is a collection of XAServer objects. In the left pane, scroll down and double-click Classes (Figure 21).

Scroll down and click on XAServer (Figure 22).

In the right-pane, you will see the information, or properties, returned by running Get-XAServer (Figure 23).

These Properties are the same as what you see back in Figure 13.

I used the same processes for finding and retrieving the information for all the nodes in the Delivery Services Console (DSC) and the Access Management Console (AMC).

My goal is to use the same wording as what is seen in the DSC and AMC for headings, captions, and text. In order to do that, I needed a way to format the output text. At this point in my PowerShell learning, I did not know how to output objects. Michael B. Smith (MBS) developed a function for me to use called Line.

Function line
#function created by Michael B. Smith, Exchange MVP
#@essentialexchange on Twitter
#http://TheEssentialExchange.com
{
   Param( [int]$tabs = 0, [string]$name = ’’, `
   [string]$value = ’’, `
   [string]$newline = “`n”, `
   [switch]$nonewline )
   While( $tabs --gt 0 ) { $global:output += “`t”; $tabs--; }
   If( $nonewline )
   {
     $global:output += $name + $value
   }
   Else
   {
     $global:output += $name + $value + $newline
   }
}

Another lesson MBS taught me is to check to see if each cmdlet used returned an error and how to tell the cmdlet how I wanted to proceed if there was an error. This is done by using –ErrorAction, or –EA. ErrorAction has four values (Table 1):

Table 1

Enumeration	Value	Description
SilentlyContinue	0	The Windows PowerShell runtime will continue processing without notifying the user that an action has occurred.
Stop	1	The Windows PowerShell runtime will stop processing when an action occurs.
Continue	2	The Windows PowerShell runtime will continue processing and notify the user that an action has occurred.
Inquire	3	The Windows PowerShell runtime will stop processing and ask the user how it should proceed.

For this documentation script, I always use 0. If an error occurs, I want the rest of the script to continue.

Next, I needed to know how to test to see if an action, like Get-XAFarm, succeeded or had an error. MBS said to use $? to test if the most recent action succeeded (True) or had an error (False). For example:

$farm = Get-XAFarm -EA 0
If( $? )
{
   #success
}
Else
{
   #error
}

There are numerous differences between XenApp 5, XenApp 6.0 and XenApp 6.5. For example:

1. Farm settings in XenApp 5 are now policy settings in XenApp 6.x
2. Server-specific settings in XenApp 5 are now policy settings in XenApp 6.5
3. XenApp 6.x uses Worker Groups
4. XenApp 6.x uses Load Balancing Policies

Because of these differences, to use PowerShell to document a XenApp farm requires a different script for each XenApp version. This also means each script needs to test to verify it is being run on the correct XenApp version.

There are also differences between XA503 and XA508. The script will check for all the differences and for the sample script output, I will show the results from both XA503 and XA508.

Let’s get started. We will build the script node by node.

The beginning of the script:

#Original Script created 8/17/2010 by Michael Bogobowicz, Citrix Systems.
#To contact, please message @mcbogo on Twitter
#This script is designed to be run on a XenApp 6 server
#Modifications by Carl Webster, CTP and independent consultant
#webster@carlwebster.com
#@carlwebster on Twitter
#http://www.CarlWebster.com
#modified from original script for XenApp 5
Function line
#function created by Michael B. Smith, Exchange MVP
#@essentialexchange on Twitter
#http://Essential.Exchange/blog
{
   Param( [int]$tabs = 0, [string]$name = ’’, [string]$value = ’’, [string]$newline = “`n”, [switch]$nonewline )
   While( $tabs --gt 0 ) { $global:output += “`t”; $tabs--; }
   If( $nonewline )
   {
     $global:output += $name + $value
   }
   Else
   {
     $global:output += $name + $value + $newline
   }
}
#Script begins
$global:output = ""

The first node in the DSC and AMC is the Farm itself and the first thing we need to check is to verify the script is being run under XenApp 5.

# Get farm information
$farm = Get-XAFarm -EA 0
If( $? )
{
   #first check to make sure this is a XenApp 5 farm
   If($Farm.ServerVersion.ToString().SubString(0,1) -ne "6")
   {
     #this is a XenApp 5 farm, script can proceed
   }
   Else
   {
     #this is not a XenApp 5 farm, script cannot proceed
     write-warning "This script is designed for XenApp 5 and should not be run on XenApp 6.x"
     Return 1
   }
   line 0 "Farm: "$farm.FarmName
}
Else
{
   line 0 "Farm information could not be retrieved"
}
Write-Output $global:output
$farm = $null
$global:output = $null

In XenApp 5, we now need to get all the farm settings.

$global:Server2008 = $False
$global:ConfigLog = $False
$farm = Get-XAFarmConfiguration -EA 0

If( $? )
{
	line 0 "Farm: "$farm.FarmName

	line 1 "Farm-wide"

	line 2 "Connection Access Controls"
	line 3 "Connection access controls"
	line 4 $Farm.ConnectionAccessControls

	line 2 "Connection Limits"
	line 3 "Connections per user"
	line 4 "Maximum connections per user: " -NoNewLine
	If($Farm.ConnectionLimitsMaximumPerUser -eq -1)
	{
		line 0 "No limit set"
	}
	Else
	{
		line 0 $Farm.ConnectionLimitsMaximumPerUser
	}
	If($Farm.ConnectionLimitsEnforceAdministrators)
	{
		line 5 "Enforce limit on administrators"
	}
	Else
	{
		line 5 "Do not enforce limit on administrators"
	}

	line 4 "Logging"

	If($Farm.ConnectionLimitsLogOverLimits)
	{
		line 5 "Log over-the-limit denials"
	}
	Else
	{
		line 5 "Do not log over-the-limit denials"
	}

	line 2 "Health Monitoring & Recovery"
	line 3 "Limit server for load balancing"
	line 4 "Limit servers (%): " $Farm.HmrMaximumServerPercent

	line 2 "Configuration Logging"
	If($Farm.ConfigLogEnabled)
	{
		$global:ConfigLog = $True

		line 3 "Database configuration"
		line 4 "Database type: " $Farm.ConfigLogDatabaseType
		If($Farm.ConfigLogDatabaseAuthenticationMode -eq "Native")
		{
			line 4 "Use SQL Server authentication"
		}
		Else
		{
			line 4 "Use Windows integrated security"
		}

		line 4 "Connection String: " -NoNewLine

		$StringMembers = "`n`t`t`t`t`t" + $Farm.ConfigLogDatabaseConnectionString.replace(";","`n`t`t`t`t`t")

		line 4 $StringMembers -NoNewLine
		line 0 "User name=" $Farm.ConfigLogDatabaseUserName

		line 3 "Log tasks"
		line 4 "Log administrative tasks to logging database: " $Farm.ConfigLogEnabled
		line 5 "Disconnected database"
		line 6 "Allow changes to the farm when database is disconnected: " $Farm.ConfigLogChangesWhileDisconnectedAllowed
		line 3 "Clearing log"
		line 4 "Require administrators to enter database credentials before clearing the log: " $Farm.ConfigLogCredentialsOnClearLogRequired
	}
	Else
	{
		line 3 "Configuration logging is not enabled"
	}

	line 2 "Memory/CPU"

	line 3 "Exclude Applications"
	line 4 "Applications that memory optimization ignores: "
	If($Farm.MemoryOptimizationExcludedApplications)
	{
		ForEach($App in $Farm.MemoryOptimizationExcludedApplications)
		{
			line 5 $App
		}
	}
	Else
	{
		line 5 "No applications are listed"
	}

	line 3 "Optimization Interval"
	line 4 "Optimization interval: " $Farm.MemoryOptimizationScheduleType

	If($Farm.MemoryOptimizationScheduleType -eq "Weekly")
	{
		line 5 "Day of week: " + $Farm.MemoryOptimizationScheduleDayOfWeek
	}
	If($Farm.MemoryOptimizationScheduleType -eq "Monthly")
	{
		line 5 "Day of month: " + $Farm.MemoryOptimizationScheduleDayOfMonth
	}

	line 5 "Optimization time: " $Farm.MemoryOptimizationScheduleTime
	line 4 "Memory optimization user"
	If($Farm.MemoryOptimizationLocalSystemAccountUsed)
	{
		line 4 "Use local system account"
	}
	Else
	{
		line 4 "Account: " + $Farm.MemoryOptimizationUser
	}

	line 2 "XenApp"
	line 3 "General"
	line 4 "Respond to client broadcast messages"
	line 5 "Data collectors: " $Farm.RespondDataCollectors
	line 5 "RAS servers: " $Farm.RespondRasServers
	line 4 "Client time zones"
	line 5 "Use client's local time: " $Farm.ClientLocalTimeEnabled
	line 6 "Estimate local time for clients: " $Farm.ClientLocalTimeEstimationEnabled
	line 4 "Citrix XML Service"
	line 5 "XML Service DNS address resolution: " $Farm.DNSAddressResolution
	line 4 "Novell Directory Services"
	line 5 "NDS preferred tree: " -NoNewLine
	If($Farm.NdsPreferredTree)
	{
		line 0 $Farm.NdsPreferredTree
	}
	Else
	{
		line 0 "No NDS Tree entered"
	}
	line 4 "Enable 32 bit icon color depth"
	line 5 "Enable: " $Farm.EnhancedIconEnabled

	line 3 "Shadow Policies"
	line 4 "Shadow policies"
	line 5 "Merge shadowers in multiple policies: " $Farm.ShadowPoliciesMerge

	line 2 "HDX Broadcast"
	line 3 "Session Reliability"
	line 4 "Session reliability"
	line 5 "Allow users to view sessions during broken connection: " $Farm.SessionReliabilityEnabled
	line 5 "Port number (default 2598): " $Farm.SessionReliabilityPort
	line 5 "Seconds to keep sessions active: " $Farm.SessionReliabilityTimeout

	line 2 "Citrix Streaming Server"
	line 3 "Log Citrix Streaming Server application events"
	line 4 "Log application events to event log: " $Farm.StreamingLogEvents
	line 3 "Trust Citrix Streaming Clients"
	line 4 "Trust Citrix Delivery Clients: " $Farm.StreamingTrustCLient

	line 2 "Virtual IP"
	line 3 "Address Configuration"
	line 4 "Virtual IP address ranges:"

	$VirtualIPs = Get-XAVirtualIPRange
	If($? -and $VirtualIPs)
	{
		ForEach($VirtualIP in $VirtualIPs)
		{
			line 5 "IP Range: " $VirtualIP
		}
	}
	Else
	{
		line 5 "No virtual IP address range defined"
	}
	$VirtualIPs = $Null

	line 4 "Enable logging of IP address assignment and release: " $Farm.VirtualIPLoggingEnabled
	line 3 "Process Configuration"
	line 4 "Virtual IP Processes"
	If($Farm.VirtualIPProcess)
	{
		line 5 "Monitor the following processes:"
		ForEach($Process in $Farm.VirtualIPProcess)
		{
			line 6 "Process: " $Process
		}
	}
	Else
	{
		Line 5 "No virtual IP processes defined"
	}
	line 4 "Virtual Loopback Processes"
	If($Farm.VirtualIPLoopbackProcesses)
	{
		line 5 "Monitor the following processes:"
		ForEach($Process in $Farm.VirtualIPLoopbackProcesses)
		{
			line 6 "Process: " $Process
		}
	}
	Else
	{
		Line 5 "No virtual IP Loopback processes defined"
	}

	line 1 "Server Default"
	line 2 "HDX Broadcast"
	line 3 "Auto Client Reconnect"
	line 4 "Auto client reconnect"
	If($Farm.AcrEnabled)
	{
		line 5 "Reconnect automatically"
		line 5 "Log automatic reconnection attempts: " -NoNewLine

		If($Farm.AcrLogReconnections)
		{
			line 0 "Enabled"
		}
		Else
		{
			line 0 "Disabled"
		}
	}
	Else
	{
		line 5 "Require user authentication"
	}

	line 3 "Display"
	line 4 "HDX Broadcast Display"
	line 5 "Discard queue image"
	line 6 "Discard queued image that is replaced by another image: " $Farm.DisplayDiscardQueuedImages
	line 5 "Cache image"
	line 6 "Cache image to make scrolling smoother: " $Farm.DisplayCacheImageForSmoothScrolling
	line 5 "Maximum memory to use for each session's graphics (KB): " $Farm.DisplayMaximumGraphicsMemory
	line 5 "Degradation bias"
	If($Farm.DisplayDegradationBias -eq "Resolution")
	{
		line 6 "Degrade resolution first"
	}
	Else
	{
		line 6 "Degrade color depth first"
	}
	line 5 "Notify user of session degradation: " $Farm.DisplayNotifyUser

	line 3 "Keep-Alive"
	line 4 "Keep-Alive"
	If($Farm.KeepAliveEnabled)
	{
		line 5 "HDX Broadcast Keep-Alive time-out value (1-3600 seconds): " $Farm.KeepAliveTimeout
	}
	Else
	{
		line 5 "HDX Broadcast Keep-Alive not enabled"
	}

	line 3 "Remote Console Connections"
	line 4 "Remote console cOnnections"
	line 5 "Remove connections to the console: " $Farm.RemoteConsoleEnabled

	line 2 "License Server"
	line 3 "License server"
	line 4 "Name: " $Farm.LicenseServerName
	line 4 "Port number (default 27000): " $Farm.LicenseServerPortNumber

	line 2 "HDX Play and Play"
	line 3 "Content Redirection"
	line 4 "Content redirection from server to client"
	line 5 "Content redirection from server to client: " $Farm.ContentRedirectionEnabled

	line 2 "SNMP"
	line 3 "SNMP"
	If($Farm.SnmpEnabled)
	{
		line 4 "Send session traps to selected SNMP agent on all farm servers"
		line 5 "SNMP agent session traps"
		line 6 "Logon: " $Farm.SnmpLogonEnabled
		line 6 "Logoff: " $Farm.SnmpLogoffEnabled
		line 6 "Disconnect: " $Farm.SnmpDisconnectEnabled
		line 6 "Session limit per server: " $Farm.SnmpLimitEnabled -NoNewLine
		line 0 " " SnmpLimitPerServer
	}
	Else
	{
		line 4 "SNMP is not enabled"
	}

	line 2 "HDX 3D"
	line 3 "Browser Acceleration"
	line 4 "HDX 3D Browser Acceleration"
	If($Farm.BrowserAccelerationEnabled)
	{
		line 5 "HDX 3D Browser Acceleration is enabled"
		If($Farm.BrowserAccelerationCompressionEnabled)
		{
			line 6 "Compress JPEG images to improve bandwidth"
			line 7 "Image compression levels: " $Farm.BrowserAccelerationCompressionLevel
			If($Farm.BrowserAccelerationVariableImageCompression)
			{
				line 7 "Adjust compression level based on available bandwidth"
			}
			Else
			{
				line 7 "Do not adjust compression level based on available bandwidth"
			}
		}
		Else
		{
			line 6 "Do not compress JPEG images to improve bandwidth"
		}
	}
	Else
	{
		line 5 "HDX 3D Browser Acceleration is disabled"
	}

	line 2 "HDX Mediastream"
	line 3 "Flash"
	If($Farm.FlashAccelerationEnabled)
	{
		line 4 "Enable Flash for XenApp sessions"
		line 5 "Server-side acceleration: " $Farm.FlashAccelerationOption
	}
	Else
	{
		line 4 "Flash is not enabled for XenApp sessions"
	}
	line 3 "Multimedia Acceleration"
	If($Farm.MultimediaAccelerationEnabled)
	{
		Line 4 "Multimedia Acceleration is enabled"
		line 5 "Multimedia Acceleration (Network buffering)"
		If($Farm.MultimediaAccelerationDefaultBuffer)
		{
			line 6 "Use the default buffer of 5 seconds (recommended)"
		}
		Else
		{
			Line 6 "Custom buffer in seconds (1-10): " $Farm.MultimediaAccelerationCustomBuffer
		}
	}
	Else
	{
		Line 4 "Multimedia Acceleration is disabled"
	}

	line 1 "Offline Access"
	line 2 "Users"
	If($Farm.OfflineAccounts)
	{
		line 3 "Configured users:"
		ForEach($User in $Farm.OfflineAccounts)
		{
			line 4 $User
		}
	}
	Else
	{
		line 3 "No users configured"
	}

	line 2 "Offline License Settings"
	line 3 "License period (2-365 days): " $Farm.OfflineLicensePeriod

}
Else
{
	line 0 "Farm information could not be retrieved"
}
write-output $global:output
$farm = $null
$global:output = $null

 

Sample script output from XA503:

Farm: XA52003
    Farm-wide
        Connection Access Controls
            Connection access controls
                AllowAnyConnection
        Connection Limits
            Connections per user
                Maximum connections per user: 1
                    Do not enforce limit on administrators
                Logging
                    Log over-the-limit denials
        Health Monitoring & Recovery
            Limit server for load balancing
                Limit servers (%): 10
        Configuration Logging
            Database configuration
                Database type: SqlServer
                Use Windows integrated security
                Connection String:
                    Server=TRAININGSQL
                    Database=XA52003ConfigLog
                    Connection Timeout=20
                    Packet Size=8192
                    Encrypt=false
                    Pooling=true
                    Min Pool Size=0
                    Max Pool Size=100
                    Connection Lifetime=0
                    Enlist=true
                    Connection Reset=true
                    User name=websterslab\administrator
            Log tasks
                Log administrative tasks to logging database: True
                    Disconnected database
                        Allow changes to the farm when database is disconnected: True
            Clearing log
                Require administrators to enter database credentials before clearing the log: True
        Memory/CPU
            Exclude Applications
                Applications that memory optimization ignores:
                    No applications are listed
            Optimization Interval
                Optimization interval: Daily
                    Optimization time: 03:00
                Memory optimization user
                Use local system account
        XenApp
            General
                Respond to client broadcast messages
                    Data collectors: True
                    RAS servers: False
                Client time zones
                    Use client's local time: True
                        Estimate local time for clients: True
                Citrix XML Service
                    XML Service DNS address resolution: True
                Novell Directory Services
                    NDS preferred tree: No NDS Tree entered
                Enable 32 bit icon color depth
                    Enable: True
            Shadow Policies
                Shadow policies
                    Merge shadowers in multiple policies: False
        HDX Broadcast
            Session Reliability
                Session reliability
                    Allow users to view sessions during broken connection: True
                    Port number (default 2598): 2598
                    Seconds to keep sessions active: 180
        Citrix Streaming Server
            Log Citrix Streaming Server application events
                Log application events to event log: True
            Trust Citrix Streaming Clients
                Trust Citrix Delivery Clients: False
        Virtual IP
            Address Configuration
                Virtual IP address ranges:
                    No virtual IP address range defined
                Enable logging of IP address assignment and release: False
            Process Configuration
                Virtual IP Processes
                    No virtual IP processes defined
                Virtual Loopback Processes
                    No virtual IP Loopback processes defined
    Server Default
        HDX Broadcast
            Auto Client Reconnect
                Auto client reconnect
                    Reconnect automatically
                    Log automatic reconnection attempts: Enabled
            Display
                HDX Broadcast Display
                    Discard queue image
                        Discard queued image that is replaced by another image: True
                    Cache image
                        Cache image to make scrolling smoother: True
                    Maximum memory to use for each session's graphics (KB): 8192
                    Degradation bias
                        Degrade resolution first
                    Notify user of session degradation: True
            Keep-Alive
                Keep-Alive
                    HDX Broadcast Keep-Alive time-out value (1-3600 seconds): 60
            Remote Console Connections
                Remote console cOnnections
                    Remove connections to the console: True
        License Server
            License server
                Name: trainingdc
                Port number (default 27000): 27000
        HDX Play and Play
            Content Redirection
                Content redirection from server to client
                    Content redirection from server to client: False
        SNMP
            SNMP
                Send session traps to selected SNMP agent on all farm servers
                    SNMP agent session traps
                        Logon: True
                        Logoff: True
                        Disconnect: True
                        Session limit per server: True SnmpLimitPerServer
        HDX 3D
            Browser Acceleration
                HDX 3D Browser Acceleration
                    HDX 3D Browser Acceleration is enabled
                        Compress JPEG images to improve bandwidth
                            Image compression levels: High
                            Adjust compression level based on available bandwidth
        HDX Mediastream
            Flash
                Enable Flash for XenApp sessions
                    Server-side acceleration: AllConnections
            Multimedia Acceleration
                Multimedia Acceleration is enabled
                    Multimedia Acceleration (Network buffering)
                        Use the default buffer of 5 seconds (recommended)
    Offline Access
        Users
            No users configured
        Offline License Settings
            License period (2-365 days): 21

The next node in the DSC and AMC is Administrators. Administrators can have Privileges and Permissions. XA503 is shown in Figure 24 and Figure 25. XA508 is shown in Figure 26 and Figure 27.

The Get-XAAdministrator cmdlet does not return all the information contained in the DSC or AMC. I created a custom administrator and set permissions in each of the folders. Only the Servers and Application folders were returned. We can only work with the data Citrix returns to us via PowerShell.

I am sorting the output by the administrator’s name.

$Administrators = Get-XAAdministrator -EA 0 | sort-object AdministratorName

If( $? )
{
	line 0 ""
	line 0 "Administrators:"
	ForEach($Administrator in $Administrators)
	{
		line 0 ""
		line 1 "Administrator name: "$Administrator.AdministratorName
		line 1 "Administrator type: "$Administrator.AdministratorType -nonewline
		line 0 " Administrator"
		line 1 "Administrator account is " -NoNewLine
		If($Administrator.Enabled)
		{
			line 0 "Enabled"
		}
		Else
		{
			line 0 "Disabled"
		}
		line 1 "Alert Contact Details"
		line 2 "E-mail: " $Administrator.EmailAddress
		line 2 "SMS Number: " $Administrator.SmsNumber
		line 2 "SMS Gateway: " $Administrator.SmsGateway
		If ($Administrator.AdministratorType -eq "Custom")
		{
			line 1 "Farm Privileges:"
			ForEach($farmprivilege in $Administrator.FarmPrivileges)
			{
				line 2 $farmprivilege
			}

			line 1 "Folder Privileges:"
			ForEach($folderprivilege in $Administrator.FolderPrivileges)
			{
				$test = $folderprivilege.ToString()
				$folderlabel = $test.substring(0, $test.IndexOf(":") + 1)
				line 2 $folderlabel
				$test1 = $test.substring($test.IndexOf(":") + 1)
				$folderpermissions = $test1.replace(",","`n`t`t`t")
				line 3 $folderpermissions
			}
		}

	write-output $global:output
	$global:output = $null
	}
}
Else
{
	line 0 "Administrator information could not be retrieved"
	write-output $global:output
}

$Administrators = $null
$global:outout = $null

 

Script output from XA503:
Administrators:

    Administrator name: WEBSTERSLAB\Administrator
    Administrator type: Full Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:

    Administrator name: WEBSTERSLAB\bshell
    Administrator type: ViewOnly Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:

    Administrator name: WEBSTERSLAB\cwebster
    Administrator type: Custom Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:
    Farm Privileges:
        EditFarmOther
        EditConfigurationLog
        EditZone
        ViewFarm
        LogOnWIConsole
        LogOnConsole
        ViewAdmins
        AssignLoadEvaluators
        EditLoadEvaluators
        ViewLoadEvaluators
        EditUserPolicies
        ViewUserPolicies
        EditOtherPrinterSettings
        EditPrinterDrivers
        EditPrinters
        ReplicatePrinterDrivers
        ViewPrintersAndDrivers
    Folder Privileges:
        Servers:
             AssignApplications
             ViewSessions
             ConnectSessions
             SendMessages
             LogOffSessions
             DisconnectSessions
             ResetSessions
             ViewServers
             EditServerSnmpSettings
             EditOtherServerSettings
             RemoveServer
             TerminateProcess
             EditLicenseServer
        Applications:
             ViewApplications
             EditApplications
             ViewSessions
             ConnectSessions
             SendMessages
             LogOffSessions
             DisconnectSessions
             ResetSessions
             TerminateProcessApplication
        Monitoring Profiles:

Script output from XA508:

Administrators:

    Administrator name: WEBSTERSLAB\Administrator
    Administrator type: Full Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:

    Administrator name: WEBSTERSLAB\bshell
    Administrator type: ViewOnly Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:

    Administrator name: WEBSTERSLAB\cwebster
    Administrator type: Custom Administrator
    Administrator account is Enabled
    Alert Contact Details
        E-mail:
        SMS Number:
        SMS Gateway:
    Farm Privileges:
        EditFarmOther
        EditConfigurationLog
        EditZone
        ViewFarm
        LogOnWIConsole
        LogOnConsole
        ViewAdmins
        AssignLoadEvaluators
        EditLoadEvaluators
        ViewLoadEvaluators
        EditUserPolicies
        ViewUserPolicies
        EditOtherPrinterSettings
        EditPrinterDrivers
        EditPrinters
        ReplicatePrinterDrivers
        ViewPrintersAndDrivers
    Folder Privileges:
        Servers:
             AssignApplications
             ViewSessions
             ConnectSessions
             SendMessages
             LogOffSessions
             DisconnectSessions
             ResetSessions
             ViewServers
             EditServerSnmpSettings
             EditOtherServerSettings
             RemoveServer
             TerminateProcess
             EditLicenseServer
        Applications:
             ViewApplications
             EditApplications
             ViewSessions
             ConnectSessions
             SendMessages
             LogOffSessions
             DisconnectSessions
             ResetSessions
             TerminateProcessApplication

The next node is the applications. Because applications can be in folders, I am sorting the output by folder name and then by the application’s display name.

$Applications = Get-XAApplication -EA 0 | sort-object FolderPath, DisplayName

If( $? -and $Applications)
{
	line 0 ""
	line 0 "Applications:"
	ForEach($Application in $Applications)
	{
		$AppServerInfoResults = $False
		$AppServerInfo = Get-XAApplicationReport -BrowserName $Application.BrowserName -EA 0
		If( $? )
		{
			$AppServerInfoResults = $True
		}
		$streamedapp = $False
		If($Application.ApplicationType -Contains "streamedtoclient" -or $Application.ApplicationType -Contains "streamedtoserver")
		{
			$streamedapp = $True
		}
		#name properties
		line 0 ""
		line 1 "Display name: " $Application.DisplayName
		line 2 "Application name (Browser name): " $Application.BrowserName
		line 2 "Disable application: " -NoNewLine
		If ($Application.Enabled)
		{
		 line 0 "False"
		}
		Else
		{
		 line 0 "True"
		}
		line 2 "Hide disabled application: " $Application.HideWhenDisabled
		line 2 "Application description: " $Application.Description

		#type properties
		line 2 "Application Type: " $Application.ApplicationType
		line 2 "Folder path: " $Application.FolderPath
		line 2 "Content Address: " $Application.ContentAddress

		#if a streamed app
		If($streamedapp)
		{
			line 2 "Citrix streaming application profile address: " $Application.ProfileLocation
			line 2 "Application to launch from the Citrix streaming application profile: " $Application.ProfileProgramName
			line 2 "Extra command line parameters: " $Application.ProfileProgramArguments
			#if streamed, Offline access properties
			If($Application.OfflineAccessAllowed)
			{
				line 2 "Enable offline access: " $Application.OfflineAccessAllowed
			}
			If($Application.CachingOption)
			{
				line 2 "Cache preference: " $Application.CachingOption
			}
		}

		If(!$streamedapp)
		{
			#location properties
			line 2 "Command line: " $Application.CommandLineExecutable
			line 2 "Working directory: " $Application.WorkingDirectory

			#servers properties
			If($AppServerInfoResults)
			{
				line 2 "Servers:"
				ForEach($servername in $AppServerInfo.ServerNames)
				{
					line 3 $servername
				}
			}
			Else
			{
				line 3 "Unable to retrieve a list of Servers for this application"
			}
		}

		#users properties
		If($Application.AnonymousConnectionsAllowed)
		{
			line 2 "Allow anonymous users: " $Application.AnonymousConnectionsAllowed
		}
		Else
		{
			If($AppServerInfoResults)
			{
				line 2 "Users:"
				ForEach($user in $AppServerInfo.Accounts)
				{
					line 3 $user
				}
			}
			Else
			{
				line 3 "Unable to retrieve a list of Users for this application"
			}
		}

		#shortcut presentation properties
		#application icon is ignored
		line 2 "Client application folder: " $Application.ClientFolder
		If($Application.AddToClientStartMenu)
		{
			line 2 "Add to client's start menu: " $Application.AddToClientStartMenu
		}
		If($Application.StartMenuFolder)
		{
			line 2 "Start menu folder: " $Application.StartMenuFolder
		}
		If($Application.AddToClientDesktop)
		{
			line 2 "Add shortcut to the client's desktop: " $Application.AddToClientDesktop
		}

		#access control properties
		If($Application.ConnectionsThroughAccessGatewayAllowed)
		{
			line 2 "Allow connections made through AGAE: " $Application.ConnectionsThroughAccessGatewayAllowed
		}
		If($Application.OtherConnectionsAllowed)
		{
			line 2 "Any connection: " $Application.OtherConnectionsAllowed
		}
		If($Application.AccessSessionConditionsEnabled)
		{
			line 2 "Any connection that meets any of the following filters: " $Application.AccessSessionConditionsEnabled
			line 2 "Access Gateway Filters:"
			ForEach($filter in $Application.AccessSessionConditions)
			{
				line 3 $filter
			}
		}

		#content redirection properties
		If($AppServerInfoResults)
		{
			If($AppServerInfo.FileTypes)
			{
				line 2 "File type associations:"
				ForEach($filetype in $AppServerInfo.FileTypes)
				{
					line 3 $filetype
				}
			}
			Else
			{
				line 2 "No File Type Associations exist for this application"
			}
		}
		Else
		{
			line 2 "Unable to retrieve the list of File Type Associations for this application"
		}

		#if streamed app, Alternate profiles
		If($streamedapp)
		{
			If($Application.AlternateProfiles)
			{
				line 2 "Primary application profile location: " $Application.AlternateProfiles
			}

			#if streamed app, User privileges properties
			If($Application.RunAsLeastPrivilegedUser)
			{
				line 2 "Run application as a least-privileged user account: " $Application.RunAsLeastPrivilegedUser
			}
		}

		#limits properties
		line 2 "Limit instances allowed to run in server farm: " -NoNewLine

		If($Application.InstanceLimit -eq -1)
		{
			line 0 "No limit set"
		}
		Else
		{
			line 0 $Application.InstanceLimit
		}

		line 2 "Allow only one instance of application for each user: " -NoNewLine

		If ($Application.MultipleInstancesPerUserAllowed)
		{
			line 0 "False"
		}
		Else
		{
			line 0 "True"
		}

		If($Application.CpuPriorityLevel)
		{
			line 2 "Application importance: " $Application.CpuPriorityLevel
		}

		#client options properties
		If($Application.AudioRequired)
		{
			line 2 "Enable legacy audio: " $Application.AudioRequired
		}
		If($Application.AudioType)
		{
			line 2 "Minimum requirement: " $Application.AudioType
		}
		If($Application.SslConnectionEnable)
		{
			line 2 "Enable SSL and TLS protocols: " $Application.SslConnectionEnabled
		}
		If($Application.EncryptionLevel)
		{
			line 2 "Encryption: " $Application.EncryptionLevel
		}
		If($Application.EncryptionRequire)
		{
			line 2 "Minimum requirement: " $Application.EncryptionRequired
		}

		line 2 "Start this application without waiting for printers to be created: " -NoNewLine
		If ($Application.WaitOnPrinterCreation)
		{
			line 0 "False"
		}
		Else
		{
			line 0 "True"
		}

		#appearance properties
		If($Application.WindowType)
		{
			line 2 "Session window size: " $Application.WindowType
		}
		If($Application.ColorDepth)
		{
			line 2 "Maximum color quality: " $Application.ColorDepth
		}
		If($Application.TitleBarHidden)
		{
			line 2 "Hide application title bar: " $Application.TitleBarHidden
		}
		If($Application.MaximizedOnStartup)
		{
			line 2 "Maximize application at startup: " $Application.MaximizedOnStartup
		}

	write-output $global:output
	$global:output = $null
	}
}
Else
{
	line 0 "Application information could not be retrieved"
}

$Applications = $null
$global:output = $null

 

Script output from XA503 only:

Applications:

    Display name: Notepad
        Application name (Browser name): Notepad
        Disable application: False
        Hide disabled application: False
        Application description:
        Application Type: ServerInstalled
        Folder path: Applications
        Content Address:
        Command line: c:\windows\system32\notepad.exe "%*"
        Working directory:
        Servers:
            XA520032
            XA520031
        Users:
            WEBSTERSLAB\Domain Users
        Client application folder:
        Allow connections made through AGAE: True
        Any connection: True
        File type associations:
            BATFILE
            CMDFILE
            INFFILE
            INIFILE
            TXTFILE
        Limit instances allowed to run in server farm: No limit set
        Allow only one instance of application for each user: False
        Application importance: Normal
        Minimum requirement: None
        Encryption: Bits128
        Start this application without waiting for printers to be created: True
        Session window size: 1024x768
        Maximum color quality: TrueColor

    Display name: Paint
        Application name (Browser name): Paint
        Disable application: False
        Hide disabled application: False
        Application description:
        Application Type: ServerInstalled
        Folder path: Applications
        Content Address:
        Command line: c:\windows\system32\mspaint.exe "%*"
        Working directory:
        Servers:
            XA520032
            XA520031
        Users:
            WEBSTERSLAB\Domain Users
        Client application folder:
        Allow connections made through AGAE: True
        Any connection: True
        File type associations:
            PAINT.PICTURE
        Limit instances allowed to run in server farm: No limit set
        Allow only one instance of application for each user: False
        Application importance: Normal
        Minimum requirement: None
        Encryption: Bits56
        Start this application without waiting for printers to be created: True
        Session window size: 800x600
        Maximum color quality: TrueColor

I didn’t have any streamed applications in my lab but a couple of friends who helped test this script did and the streaming information was displayed.

The next node is Servers.

$servers = Get-XAServer -EA 0 | sort-object FolderPath, ServerName

If( $? )
{
	line 0 ""
	line 0 "Servers:"
	ForEach($server in $servers)
	{
		line 1 "Name: " $server.ServerName
		line 2 "Product: " $server.CitrixProductName -NoNewLine
		line 0 ", " $server.CitrixEdition -NoNewLine
		line 0 " Edition"
		line 2 "Version: " $server.CitrixVersion
		line 2 "Service Pack: " $server.CitrixServicePack
		line 2 "Operating System Type: " -NoNewLine
		If($server.Is64Bit)
		{
			line 0 "64 bit"
		}
		Else
		{
			line 0 "32 bit"
		}
		line 2 "TCP Address: " $server.IPAddresses
		line 2 "Logon: " -NoNewLine
		If($server.LogOnsEnabled)
		{
			line 0 "Enabled"
		}
		Else
		{
			line 0 "Disabled"
		}
		line 2 "Product Installation Date: " $server.CitrixInstallDate
		line 2 "Operating System Version: " $server.OSVersion -NoNewLine

		#is the server running server 2008?
		If($server.OSVersion.ToString().SubString(0,1) -eq "6")
		{
			$global:Server2008 = $True
		}

		line 0 " " $server.OSServicePack
		line 2 "Zone: " $server.ZoneName
		line 2 "Election Preference: " $server.ElectionPreference
		line 2 "Folder: " $server.FolderPath
		line 2 "Product Installation Path: " $server.CitrixInstallPath
		If($server.ICAPortNumber -gt 0)
		{
			line 2 "ICA Port Number: " $server.ICAPortNumber
		}
		$ServerConfig = Get-XAServerConfiguration -ServerName $Server.ServerName
		If( $? )
		{
			line 2 "Server Configuration Data:"
			If($ServerConfig.AcrUseFarmSettings)
			{
				line 3 "HDX Broadcast\Auto Client Reconnect: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX Broadcast\Auto Client Reconnect: Server is not using farm settings"
				If($ServerConfig.AcrEnabled)
				{
					line 4 "Reconnect automatically"
					line 5 "Log automatic reconnection attempts: " $ServerConfig.AcrLogReconnections
				}
				Else
				{
					line 4 "Require user authentication"
				}
			}
			line 3 "HDX Broadcast\Browser\Create browser listener on UDP network: " $ServerConfig.BrowserUdpListener
			line 3 "HDX Broadcast\Browser\Server responds to client broadcast messages: " $ServerConfig.BrowserRespondToClientBroadcasts
			If($ServerConfig.DisplayUseFarmSettings)
			{
				line 3 "HDX Broadcast\Display: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX Broadcast\Display: Server is not using farm settings"
				line 4 "Discard queue image\Discard queued image that is replaced by another image: " $ServerConfig.DisplayDiscardQueuedImages
				line 4 "Cache image\Cache image to make scrolling smoother: " $ServerConfig.DisplayCacheImageForSmoothScrolling
				line 4 "Maximum memory to use for each session's graphics (KB): " $ServerConfig.DisplayMaximumGraphicsMemory
				line 4 "Degradation bias: " $ServerConfig.DisplayDegradationBias
				line 4 "Display\Notify user of session degradation: " $ServerConfig.DisplayNotifyUser
			}
			If($ServerConfig.KeepAliveUseFarmSettings)
			{
				line 3 "HDX Broadcast\Keep-Alive: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX Broadcast\Keep-Alive: Server is not using farm settings"
				line 4 "HDX Broadcast Keep-Alive time-out value: " -NoNewLine
				If($ServerConfig.KeepAliveEnabled)
				{
					line 0 $ServerConfig.KeepAliveTimeout
				}
				Else
				{
					line 0 "Disabled"
				}
			}
			If($ServerConfig.PrinterBandwidth -eq -1)
			{
				line 3 "HDX Broadcast\Printer Bandwidth\Unlimited bandwidth"
			}
			Else
			{
				line 3 "HDX Broadcast\Printer Bandwidth\Limit bandwidth to use (kbps): " $ServerConfig.PrinterBandwidth
			}
			If($ServerConfig.RemoteConsoleUseFarmSettings)
			{
				line 3 "HDX Broadcast\Remote Console Connections: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX Broadcast\Remote Console Connections: Server is not using farm settings"
				line 4 "Remote connections to the console: " $ServerConfig.RemoteConsoleEnabled
			}
			If($ServerConfig.LicenseServerUseFarmSettings)
			{
				line 3 "License Server: Server is using farm settings"
			}
			Else
			{
				line 3 "License Server: Server is not using farm settings"
				line 4 "License server name: " $ServerConfig.LicenseServerName
				line 4 "License server port: " $ServerConfig.LicenseServerPortNumber
			}
			If($ServerConfig.HmrUseFarmSettings)
			{
				line 3 "Health Monitoring & Recovery: Server is using farm settings"
			}
			Else
			{
				line 3 "Health Monitoring & Recovery: Server is not using farm settings"
				line 4 "Run health monitoring tests on this server: " $ServerConfig.HmrEnabled
				If($ServerConfig.HmrEnabled)
				{
					$HMRTests = Get-XAHmrTest -ServerName $Server.ServerName -EA 0
					If( $? )
					{
						line 4 "Health Montoring Tests:"
						ForEach($HMRTest in $HMRTests)
						{
							line 5 "Name      : " $HMRTest.TestName
							line 5 "Interval    : " $HMRTest.Interval
							line 5 "Threshold    : " $HMRTest.Threshold
							line 5 "Time-out    : " $HMRTest.Timeout
							line 5 "Test File Name : " $HMRTest.FilePath
							line 5 "Recovery Action : " $HMRTest.RecoveryAction
							line 5 "Test Description: " $HMRTest.Description
							line 5 ""
						}
					}
					Else
					{
						line 0 "Health Monitoring & Reporting data could not be retrieved for server " $Server.ServerName
					}
				}
			}
			If($ServerConfig.CpuUseFarmSettings)
			{
				line 3 "CPU Utilization Management: Server is using farm settings"
			}
			Else
			{
				line 3 "CPU Utilization Management: Server is not using farm settings"
				line 4 "CPU Utilization Management: " $ServerConfig.CpuManagementLevel
			}
			If($ServerConfig.MemoryUseFarmSettings)
			{
				line 3 "Memory Optimization: Server is using farm settings"
			}
			Else
			{
				line 3 "Memory Optimization: Server is not using farm settings"
				line 4 "Memory Optimization: " $ServerConfig.MemoryOptimizationEnabled
			}
			If($ServerConfig.ContentRedirectionUseFarmSettings )
			{
				line 3 "HDX Plug and Play/Content Redirection: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX Plug and Play/Content Redirection: Server is not using farm settings"
				line 4 "Content redirection from server to client: " $ServerConfig.ContentRedirectionEnabled
			}
			line 3 "HDX Plug and Play/Shadow Logging/Log shadowing sessions: " $ServerConfig.ShadowLoggingEnabled
			If($ServerConfig.SnmpUseFarmSettings )
			{
				line 3 "SNMP: Server is using farm settings"
			}
			Else
			{
				line 3 "SNMP: Server is not using farm settings"
				# SnmpEnabled is not working
				line 4 "Send session traps to selected SNMP agent on all farm servers: " $ServerConfig.SnmpEnabled
				If( $ServerConfig.SnmpEnabled )
				{
					line 5 "SNMP agent session traps:"
					line 6 "Logon          : " $ServerConfig.SnmpLogOnEnabled
					line 6 "Logoff         : " $ServerConfig.SnmpLogOffEnabled
					line 6 "Disconnect       : " $ServerConfig.SnmpDisconnectEnabled
					line 6 "Session limit per server: " $ServerConfig.SnmpLimitEnabled -NoNewLine
					line 0 " " $ServerConfig.SnmpLimitPerServer
				}
			}
			If($ServerConfig.BrowserAccelerationUseFarmSettings )
			{
				line 3 "HDX 3D/Browser Acceleration: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX 3D/Browser Acceleration: Server is not using farm settings"
				line 4 "HDX 3D/Browser Acceleration: " $ServerConfig.BrowserAccelerationEnabled
				If($ServerConfig.BrowserAccelerationEnabled)
				{
					line 5 "Compress JPEG images to improve bandwidth: " $ServerConfig.BrowserAccelerationCompressionEnabled
					If($ServerConfig.BrowserAccelerationCompressionEnabled)
					{
						line 6 "Image compression level: " $ServerConfig.BrowserAccelerationCompressionLevel
						line 6 "Adjust compression level based on available bandwidth: " $ServerConfig.BrowserAccelerationVariableImageCompression
					}
				}
			}
			If($ServerConfig.FlashAccelerationUseFarmSettings )
			{
				line 3 "HDX MediaStream/Flash: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX MediaStream/Flash: Server is not using farm settings"
				line 4 "Enable Flash for XenApp sessions: " $ServerConfig.FlashAccelerationEnabled
				If($ServerConfig.FlashAccelerationEnabled)
				{
					line 5 "Server-side acceleration: " $ServerConfig.FlashAccelerationOption
				}
			}
			If($ServerConfig.MultimediaAccelerationUseFarmSettings )
			{
				line 3 "HDX MediaStream/Multimedia Acceleration: Server is using farm settings"
			}
			Else
			{
				line 3 "HDX MediaStream/Multimedia Acceleration: Server is not using farm settings"
				line 4 "Multimedia acceleration: " $ServerConfig.MultimediaAccelerationEnabled
				If($ServerConfig.MultimediaAccelerationEnabled)
				{
					If($ServerConfig.MultimediaAccelerationDefaultBuffer)
					{
						line 5 "Use the default buffer of 5 seconds"
					}
					Else
					{
						line 5 "Custom buffer in seconds: " $ServerConfig.MultimediaAccelerationCustomBuffer
					}
				}
			}
			line 3 "Virtual IP/Enable virtual IP for this server: " $ServerConfig.VirtualIPEnabled
			line 3 "Virtual IP/Use farm setting for IP address logging: " $ServerConfig.VirtualIPUseFarmLoggingSettings
			line 3 "Virtual IP/Enable logging of IP address assignment and release on this server: " $ServerConfig.VirtualIPLoggingEnabled
			line 3 "Virtual IP/Enable virtual loopback for this server: " $ServerConfig.VirtualIPLoopbackEnabled
			line 3 "XML Service/Trust requests sent to the XML service: " $ServerConfig.XmlServiceTrustRequests
		}
		Else
		{
			line 0 "Server configuration data could not be retrieved for server " $Server.ServerName
		}
		#applications published to server
		$Applications = Get-XAApplication -ServerName $server.ServerName -EA 0 | sort-object FolderPath, DisplayName
		If( $? -and $Applications )
		{
			line 2 "Published applications:"
			ForEach($app in $Applications)
			{
				line 0 ""
				line 3 "Display name: " $app.DisplayName
				line 3 "Folder path: " $app.FolderPath
			}
		}
		#Citrix hotfixes installed
		$hotfixes = Get-XAServerHotfix -ServerName $server.ServerName -EA 0 | sort-object HotfixName
		If( $? -and $hotfixes )
		{
			line 0 ""
			line 2 "Citrix Hotfixes:"
			ForEach($hotfix in $hotfixes)
			{
				line 0 ""
				line 3 "Hotfix: " $hotfix.HotfixName
				line 3 "Installed by: " $hotfix.InstalledBy
				line 3 "Installed date: " $hotfix.InstalledOn
				line 3 "Hotfix type: " $hotfix.HotfixType
				line 3 "Valid: " $hotfix.Valid
				line 3 "Hotfixes replaced: "
				ForEach($Replaced in $hotfix.HotfixesReplaced)
				{
					line 4 $Replaced
				}
			}
		}

		line 0 ""
		write-output $global:output
		$global:output = $null
	}
}
Else
{
	line 0 "Server information could not be retrieved"
}
$servers = $null
$global:output = $null

 

Script output from XA503:

Servers:
		Name: XA520031
				Product: Citrix Presentation Server, Platinum Edition
				Version: 4.6.3600
				Service Pack: 2006.10
				Operating System Type: 32 bit
				TCP Address: 192.168.1.102
				Logon: Enabled
				Product Installation Date: 10/01/2011 07:23:58
				Operating System Version: 5.2.3790 Service Pack 2
				Zone: 192.168.1.0
				Election Preference: MostPreferred
				Folder: Servers
				Product Installation Path: C:\Program Files\Citrix\
				ICA Port Number: 1494
				Server Configuration Data:
						HDX Broadcast\Auto Client Reconnect: Server is using farm settings
						HDX Broadcast\Browser\Create browser listener on UDP network: True
						HDX Broadcast\Browser\Server responds to client broadcast messages: False
						HDX Broadcast\Display: Server is using farm settings
						HDX Broadcast\Keep-Alive: Server is using farm settings
						HDX Broadcast\Printer Bandwidth\Unlimited bandwidth
						HDX Broadcast\Remote Console Connections: Server is using farm settings
						License Server: Server is using farm settings
						Health Monitoring & Recovery: Server is using farm settings
						CPU Utilization Management: Server is using farm settings
						Memory Optimization: Server is using farm settings
						HDX Plug and Play/Content Redirection: Server is using farm settings
						HDX Plug and Play/Shadow Logging/Log shadowing sessions:
						SNMP: Server is using farm settings
						HDX 3D/Browser Acceleration: Server is using farm settings
						HDX MediaStream/Flash: Server is using farm settings
						HDX MediaStream/Multimedia Acceleration: Server is using farm settings
						Virtual IP/Enable virtual IP for this server: False
						Virtual IP/Use farm setting for IP address logging: True
						Virtual IP/Enable logging of IP address assignment and release on this server: False
						Virtual IP/Enable virtual loopback for this server: False
						XML Service/Trust requests sent to the XML service: False
						Published applications:

								Display name: Notepad
								Folder path: Applications

								Display name: Paint
								Folder path: Applications

						Citrix Hotfixes:

								Hotfix: PSE450W2K3R05
								Installed by: WEBSTERSLAB\Administrator
								Installed date: 09/30/2011 21:25:49
								Hotfix type: HRP
								Valid: False
								Hotfixes replaced:
										PSE450R03W2K3030
										PSE450W2K3005
										PSE450R04W2K3025
										PSE450W2K3R04

										PSE450W2K3006
										PSE450R04W2K3030
										PSE450R02W2K3036

								Hotfix: PSE450W2K3R07
								Installed by: WEBSTERSLAB\Administrator
								Installed date: 09/30/2011 21:55:37
								Hotfix type: HRP
								Valid: True
								Hotfixes replaced:
										PSE450R01W2K3001
										PSE450R01W2K3002
										PSE450R01W2K3003
										PSE450R01W2K3004

										PSE450W2K3R05
										PSE450W2K3R06
										PSE450R03W2K3WS

		Name: XA520032
				Product: Citrix Presentation Server, Platinum Edition
				Version: 4.6.3600
				Service Pack: 2006.10
				Operating System Type: 64 bit
				TCP Address: 192.168.1.103
				Logon: Enabled
				Product Installation Date: 10/01/2011 07:30:49
				Operating System Version: 5.2.3790 Service Pack 2
				Zone: 192.168.1.0
				Election Preference: DefaultPreference
				Folder: Servers
				Product Installation Path: C:\Program Files (x86)\Citrix\
				ICA Port Number: 1494
				Server Configuration Data:
						HDX Broadcast\Auto Client Reconnect: Server is using farm settings
						HDX Broadcast\Browser\Create browser listener on UDP network: True
						HDX Broadcast\Browser\Server responds to client broadcast messages: False
						HDX Broadcast\Display: Server is using farm settings
						HDX Broadcast\Keep-Alive: Server is using farm settings
						HDX Broadcast\Printer Bandwidth\Limit bandwidth to use (kbps): 300
						HDX Broadcast\Remote Console Connections: Server is using farm settings
						License Server: Server is using farm settings
						Health Monitoring & Recovery: Server is using farm settings
						CPU Utilization Management: Server is using farm settings
						Memory Optimization: Server is using farm settings
						HDX Plug and Play/Content Redirection: Server is using farm settings
						HDX Plug and Play/Shadow Logging/Log shadowing sessions:
						SNMP: Server is not using farm settings
								Send session traps to selected SNMP agent on all farm servers:
						HDX 3D/Browser Acceleration: Server is using farm settings
						HDX MediaStream/Flash: Server is using farm settings
						HDX MediaStream/Multimedia Acceleration: Server is using farm settings
						Virtual IP/Enable virtual IP for this server: False
						Virtual IP/Use farm setting for IP address logging: True
						Virtual IP/Enable logging of IP address assignment and release on this server: False
						Virtual IP/Enable virtual loopback for this server: False
						XML Service/Trust requests sent to the XML service: True
						Published applications:

								Display name: Notepad
								Folder path: Applications

								Display name: Paint
								Folder path: Applications

						Citrix Hotfixes:

								Hotfix: PSE450W2K3X64R05
								Installed by: WEBSTERSLAB\Administrator
								Installed date: 09/30/2011 21:31:58
								Hotfix type: HRP
								Valid: False
								Hotfixes replaced:
										PSE450R01W2K3X64006
										PSE450R01W2K3X64032
										PSE450R01W2K3X64030
										PSE450R02W2K3X64027

										PSE450R04W2K3X64014
										PSE450R04W2K3X64015
										PSE450W2K3X64R04

										Hotfix: PSE450W2K3X64R07
										Installed by: WEBSTERSLAB\Administrator
										Installed date: 09/30/2011 21:57:32
										Hotfix type: HRP
										Valid: True
										Hotfixes replaced:
												PSE450R01W2K3X64001
												PSE450R01W2K3X64002
												PSE450R01W2K3X64003
												PSE450R01W2K3X64004

												PSE450W2K3X64R04
												PSE450W2K3X64R05
												PSE450W2K3X64R06

Script output from XA508:

Servers:

    Name: XA520081
        Product: Citrix Presentation Server, Platinum Edition
        Version: 5.0.5357
        Service Pack: 0
        Operating System Type: 32 bit
        TCP Address: 192.168.1.104
        Logon: Enabled
        Product Installation Date: 10/01/2011 08:27:59
        Operating System Version: 6.0.6002 Service Pack 2
        Zone: Default Zone
        Election Preference: DefaultPreference
        Folder: Servers
        Product Installation Path: C:\Program Files\Citrix\
        ICA Port Number: 1494
        Server Configuration Data:
            HDX Broadcast\Auto Client Reconnect: Server is using farm settings
            HDX Broadcast\Browser\Create browser listener on UDP network: True
            HDX Broadcast\Browser\Server responds to client broadcast messages: False
            HDX Broadcast\Display: Server is using farm settings
            HDX Broadcast\Keep-Alive: Server is using farm settings
            HDX Broadcast\Printer Bandwidth\Unlimited bandwidth
            HDX Broadcast\Remote Console Connections: Server is using farm settings
            License Server: Server is using farm settings
            Health Monitoring & Recovery: Server is using farm settings
            CPU Utilization Management: Server is using farm settings
            Memory Optimization: Server is using farm settings
            HDX Plug and Play/Content Redirection: Server is using farm settings
            HDX Plug and Play/Shadow Logging/Log shadowing sessions:
            SNMP: Server is using farm settings
            HDX 3D/Browser Acceleration: Server is using farm settings
            HDX MediaStream/Flash: Server is using farm settings
            HDX MediaStream/Multimedia Acceleration: Server is using farm settings
            Virtual IP/Enable virtual IP for this server: False
            Virtual IP/Use farm setting for IP address logging: True
            Virtual IP/Enable logging of IP address assignment and release on this server: False
            Virtual IP/Enable virtual loopback for this server: False
            XML Service/Trust requests sent to the XML service: False

    Name: XA520082
        Product: Citrix Presentation Server, Platinum Edition
        Version: 5.0.5357
        Service Pack: 0
        Operating System Type: 64 bit
        TCP Address: 192.168.1.105
        Logon: Enabled
        Product Installation Date: 10/01/2011 08:24:54
        Operating System Version: 6.0.6002 Service Pack 2
        Zone: Default Zone
        Election Preference: MostPreferred
        Folder: Servers
        Product Installation Path: C:\Program Files (x86)\Citrix\
        ICA Port Number: 1494
        Server Configuration Data:
            HDX Broadcast\Auto Client Reconnect: Server is using farm settings
            HDX Broadcast\Browser\Create browser listener on UDP network: True
            HDX Broadcast\Browser\Server responds to client broadcast messages: False
            HDX Broadcast\Display: Server is using farm settings
            HDX Broadcast\Keep-Alive: Server is using farm settings
            HDX Broadcast\Printer Bandwidth\Unlimited bandwidth
            HDX Broadcast\Remote Console Connections: Server is using farm settings
            License Server: Server is using farm settings
            Health Monitoring & Recovery: Server is using farm settings
            CPU Utilization Management: Server is using farm settings
            Memory Optimization: Server is using farm settings
            HDX Plug and Play/Content Redirection: Server is using farm settings
            HDX Plug and Play/Shadow Logging/Log shadowing sessions:
            SNMP: Server is using farm settings
            HDX 3D/Browser Acceleration: Server is using farm settings
            HDX MediaStream/Flash: Server is using farm settings
            HDX MediaStream/Multimedia Acceleration: Server is using farm settings
            Virtual IP/Enable virtual IP for this server: False
            Virtual IP/Use farm setting for IP address logging: True
            Virtual IP/Enable logging of IP address assignment and release on this server: False
            Virtual IP/Enable virtual loopback for this server: False
            XML Service/Trust requests sent to the XML service: False

Next up, Zones.

$Zones = Get-XAZone -EA 0 | sort-object ZoneName
If( $? )
{
	line 0 ""
	line 0 "Zones:"
	ForEach($Zone in $Zones)
	{
		line 1 "Zone Name: " $Zone.ZoneName
		line 2 "Current Data Collector: " $Zone.DataCollector
		$Servers = Get-XAServer -ZoneName $Zone.ZoneName -EA 0 | sort-object ElectionPreference, ServerName
		If( $? )
		{
			line 2 "Servers in Zone"

			ForEach($Server in $Servers)
			{
				line 3 "Server Name and Preference: " $server.ServerName -NoNewLine
				line 0 " " $server.ElectionPreference
			}
		}
		Else
		{
			line 2 "Unable to enumerate servers in the zone"
		}
		write-output $global:output
		$global:output = $null
	}
}
Else
{
	line 0 "Zone information could not be retrieved"
}
$Servers = $null
$Zone = $null
$global:output = $null

 

Script output:

Zones:

		Zone Name: 192.168.1.0
				Current Data Collector: XA520031
				Servers in Zone
						Server Name and Preference: XA520031 MostPreferred
						Server Name and Preference: XA520032 DefaultPreference

There are no Citrix supplied PowerShell commands for the Monitoring Configuration node for XA503.

We have now finished the DSC and AMC so it is time to start working through the Advanced Configuration Console (ACC). Citrix does not provide any PowerShell commands for processing Installation Manager, Isolation Environments or Resource Manager in XA503. The Applications and Server nodes have already been done. That leaves us with Load Evaluators, Policies and Printer Management.

First up in the ACC is Load Evaluators.

$LoadEvaluators = Get-XALoadEvaluator -EA 0 | sort-object LoadEvaluatorName

If( $? )
{
	line 0 ""
	line 0 "Load Evaluators:"
	ForEach($LoadEvaluator in $LoadEvaluators)
	{
		line 1 "Name: " $LoadEvaluator.LoadEvaluatorName
		line 2 "Description: " $LoadEvaluator.Description

		If($LoadEvaluator.IsBuiltIn)
		{
			line 2 "Built-in Load Evaluator"
		}
		Else
		{
			line 2 "User created load evaluator"
		}

		If($LoadEvaluator.ApplicationUserLoadEnabled)
		{
			line 2 "Application User Load Settings"
			line 3 "Report full load when the number of users for this application equals: " $LoadEvaluator.ApplicationUserLoad
			line 3 "Application: " $LoadEvaluator.ApplicationBrowserName
		}

		If($LoadEvaluator.ContextSwitchesEnabled)
		{
			line 2 "Context Switches Settings"
			line 3 "Report full load when the number of context switches per second is greater than this value: " $LoadEvaluator.ContextSwitches[1]
			line 3 "Report no load when the number of context switches per second is less than or equal to this value: " $LoadEvaluator.ContextSwitches[0]
		}

		If($LoadEvaluator.CpuUtilizationEnabled)
		{
			line 2 "CPU Utilization Settings"
			line 3 "Report full load when the processor utilization percentage is greater than this value: " $LoadEvaluator.CpuUtilization[1]
			line 3 "Report no load when the processor utilization percentage is less than or equal to this value: " $LoadEvaluator.CpuUtilization[0]
		}

		If($LoadEvaluator.DiskDataIOEnabled)
		{
			line 2 "Disk Data I/O Settings"
			line 3 "Report full load when the total disk I/O in kilobytes per second is greater than this value: " $LoadEvaluator.DiskDataIO[1]
			line 3 "Report no load when the total disk I/O in kilobytes per second is less than or equal to this value: " $LoadEvaluator.DiskDataIO[0]
		}

		If($LoadEvaluator.DiskOperationsEnabled)
		{
			line 2 "Disk Operations Settings"
			line 3 "Report full load when the total number of read and write operations per second is greater than this value: " $LoadEvaluator.DiskOperations[1]
			line 3 "Report no load when the total number of read and write operations per second is less than or equal to this value: " $LoadEvaluator.DiskOperations[0]
		}

		If($LoadEvaluator.IPRangesEnabled)
		{
			line 2 "IP Range Settings"
			If($LoadEvaluator.IPRangesAllowed)
			{
				line 3 "Allow " -NoNewLine
			}
			Else
			{
				line 3 "Deny " -NoNewLine
			}
			line 3 "client connections from the listed IP Ranges"
			ForEach($IPRange in $LoadEvaluator.IPRanges)
			{
				line 4 "IP Address Ranges: " $IPRange
			}
		}

		If($LoadEvaluator.MemoryUsageEnabled)
		{
			line 2 "Memory Usage Settings"
			line 3 "Report full load when the memory usage is greater than this value: " $LoadEvaluator.MemoryUsage[1]
			line 3 "Report no load when the memory usage is less than or equal to this value: " $LoadEvaluator.MemoryUsage[0]
		}

		If($LoadEvaluator.PageFaultsEnabled)
		{
			line 2 "Page Faults Settings"
			line 3 "Report full load when the number of page faults per second is greater than this value: " $LoadEvaluator.PageFaults[1]
			line 3 "Report no load when the number of page faults per second is less than or equal to this value: " $LoadEvaluator.PageFaults[0]
		}

		If($LoadEvaluator.PageSwapsEnabled)
		{
			line 2 "Page Swaps Settings"
			line 3 "Report full load when the number of page swaps per second is greater than this value: " $LoadEvaluator.PageSwaps[1]
			line 3 "Report no load when the number of page swaps per second is less than or equal to this value: " $LoadEvaluator.PageSwaps[0]
		}

		If($LoadEvaluator.ScheduleEnabled)
		{
			line 2 "Scheduling Settings"
			line 3 "Sunday Schedule: " $LoadEvaluator.SundaySchedule
			line 3 "Monday Schedule: " $LoadEvaluator.MondaySchedule
			line 3 "Tuesday Schedule: " $LoadEvaluator.TuesdaySchedule
			line 3 "Wednesday Schedule: " $LoadEvaluator.WednesdaySchedule
			line 3 "Thursday Schedule: " $LoadEvaluator.ThursdaySchedule
			line 3 "Friday Schedule: " $LoadEvaluator.FridaySchedule
			line 3 "Saturday Schedule: " $LoadEvaluator.SaturdaySchedule
		}

		line 0 ""
		write-output $global:output
		$global:output = $null
	}

}
Else
{
	line 0 "Load Evaluator information could not be retrieved"
}
$LoadEvaluators = $null
$global:output = $null

 

Sample script output from XA503 only:

Load Evaluators:
		Name: Advanced
				Description: Use the Advanced Load Evaluator to limit memory usage, CPU utilization, and page swaps on a server for load management.
				Built-in Load Evaluator
				CPU Utilization Settings
						Report full load when the processor utilization percentage is greater than this value: 90
						Report no load when the processor utilization percentage is less than or equal to this value: 10
				Memory Usage Settings
						Report full load when the memory usage is greater than this value: 90
						Report no load when the memory usage is less than or equal to this value: 10
				Page Swaps Settings
						Report full load when the number of page swaps per second is greater than this value: 100
						Report no load when the number of page swaps per second is less than or equal to this value: 0

		Name: Default
				Description: The Default Load Evaluator uses the user session count for its criteria.
				Built-in Load Evaluator

WHEW! Now for the bad boy! Policies. This was very hard to do. Not only was there an incredible amount of typing involved but not all policy settings are available and just trying to figure some of this stuff out was pretty darn hard. Plus there are some policies only for XA508 and some of the same settings for XA503 and XA508 have different names and descriptions.

$Policies = Get-XAPolicy -EA 0 | sort-object PolicyName
If( $? -and $Policies)
{
	line 0 ""
	line 0 "Policies:"
	ForEach($Policy in $Policies)
	{
		line 1 "Policy Name: " $Policy.PolicyName
		line 2 "Description: " $Policy.Description
		line 2 "Enabled: " $Policy.Enabled
		line 2 "Priority: " $Policy.Priority

		$filter = Get-XAPolicyFilter -PolicyName $Policy.PolicyName -EA 0

		If( $? )
		{
			If($Filter)
			{
				line 2 "Policy Filters:"

				If($Filter.AccessControlEnabled)
				{
					If($Filter.AllowConnectionsThroughAccessGateway)
					{
						line 3 "Apply to connections made through Access Gateway"
						If($Filter.AccessSessionConditions)
						{
							line 4 "Any connection that meets any of the following filters"
							ForEach($Condition in $Filter.AccessSessionConditions)
							{
								$Colon = $Condition.IndexOf(":")
								$CondName = $Condition.SubString(0,$Colon)
								$CondFilter = $Condition.SubString($Colon+1)
								Line 5 "Access Gateway Farm Name: " $CondName -NoNewLine
								Line 0 " Filter Name: " $CondFilter
							}
						}
						Else
						{
							line 4 "Any connection"
						}
						line 4 "Apply to all other connections: " $Filter.AllowOtherConnections
					}
					Else
					{
						line 3 "Do not apply to connections made through Access Gateway"
					}
				}
				If($Filter.ClientIPAddressEnabled)
				{
					line 3 "Apply to all client IP addresses: " $Filter.ApplyToAllClientIPAddresses
					If($Filter.AllowedIPAddresses)
					{
						line 3 "Allowed IP Addresses:"
						ForEach($Allowed in $Filter.AllowedIPAddresses)
						{
							line 4 $Allowed
						}
					}
					If($Filter.DeniedIPAddresses)
					{
						line 3 "Denied IP Addresses:"
						ForEach($Denied in $Filter.DeniedIPAddresses)
						{
							line 4 $Denied
						}
					}
				}
				If($Filter.ClientNameEnabled)
				{
					line 3 "Apply to all client names: " $Filter.ApplyToAllClientNames
					If($Filter.AllowedClientNames)
					{
						line 3 "Allowed Client Names:"
						ForEach($Allowed in $Filter.AllowedClientNames)
						{
							line 4 $Allowed
						}
					}
					If($Filter.DeniedClientNames)
					{
						line 3 "Denied Client Names:"
						ForEach($Denied in $Filter.DeniedClientNames)
						{
							line 4 $Denied
						}
					}
				}
				If($Filter.ServerEnabled)
				{
					If($Filter.AllowedServerNames)
					{
						line 3 "Allowed Server Names:"
						ForEach($Allowed in $Filter.AllowedServerNames)
						{
							line 4 $Allowed
						}
					}
					If($Filter.DeniedServerNames)
					{
						line 3 "Denied Server Names:"
						ForEach($Denied in $Filter.DeniedServerNames)
						{
							line 4 $Denied
						}
					}
					If($Filter.AllowedServerFolders)
					{
						line 3 "Allowed Server Folders:"
						ForEach($Allowed in $Filter.AllowedServerFolders)
						{
							line 4 $Allowed
						}
					}
					If($Filter.DeniedServerFolders)
					{
						line 3 "Denied Server Folders:"
						ForEach($Denied in $Filter.DeniedServerFolders)
						{
							line 4 $Denied
						}
					}
				}
				If($Filter.AccountEnabled)
				{
					line 3 "Apply to all explicit (non-anonymous) users: " $Filter.ApplyToAllExplicitAccounts
					line 3 "Apply to anonymous users: " $Filter.ApplyToAnonymousAccounts
					If($Filter.AllowedAccounts)
					{
						line 3 "Allowed Accounts:"
						ForEach($Allowed in $Filter.AllowedAccounts)
						{
							line 4 $Allowed
						}
					}
					If($Filter.DeniedAccounts)
					{
						line 3 "Denied Accounts:"
						ForEach($Denied in $Filter.DeniedAccounts)
						{
							line 4 $Denied
						}
					}
				}
			}
			Else
			{
				line 2 "No filter information"
			}
		}
		Else
		{
			Line 2 "Unable to retrieve Filter settings"
		}

		$Settings = Get-XAPolicyConfiguration -PolicyName $Policy.PolicyName -EA 0

		If( $? )
		{
			line 2 "Policy Settings:"
			ForEach($Setting in $Settings)
			{
				#HDX 3D
				If($Setting.ImageAccelerationState -ne "NotConfigured")
				{
					line 3 "HDX 3D\Progressive Display\Progressive Display: " $Setting.ImageAccelerationState
					If($Setting.ImageAccelerationState -eq "Enabled")
					{
						line 3 "HDX 3D\Progressive Display\Progressive Display\Compression level: " $Setting.ImageAccelerationCompressionLevel
						line 3 "HDX 3D\Progressive Display\Progressive Display\Compression level\Restrict compression to connections under this bandwidth: " $Setting.ImageAccelerationCompressionIsRestricted
						If($Setting.ImageAccelerationCompressionIsRestricted)
						{
							line 3 "HDX 3D\Progressive Display\Progressive Display\Compression level\Restrict compression to connections under this bandwidth\Threshhold (Kb/sec): " $Setting.ImageAccelerationCompressionLimit
						}
						line 3 "HDX 3D\Progressive Display\Progressive Display\SpeedScreen Progressive Display compression level: " $Setting.ImageAccelerationProgressiveLevel
						line 3 "HDX 3D\Progressive Display\Progressive Display\Restrict compression to connections under this bandwidth: " $Setting.ImageAccelerationProgressiveIsRestricted
						If($Setting.ImageAccelerationProgressiveIsRestricted)
						{
							line 3 "HDX 3D\Progressive Display\Progressive Display\Restrict compression to connections under this bandwidth\Threshhold (Kb/sec): " $Setting.ImageAccelerationProgressiveLimit
						}
						line 3 "HDX 3D\Progressive Display\Progressive Display\Use Heavyweight compression (extra CPU, retains quality): " $Setting.ImageAccelerationIsHeavyweightUsed
					}
				}

				#HDX Broadcast
				If($Setting.TurnWallpaperOffState -ne "NotConfigured")
				{
					line 3 "HDX Broadcast\Visual Effects\Turn off desktop wallpaper: " $Setting.TurnWallpaperOffState
					If($Setting.TurnWallpaperOffState -eq "Enabled")
					{
						line 3 "HDX Broadcast\Visual Effects\Turn off desktop wallpaper\Turn Off Desktop Wallpaper"
					}
				}

				#menu animation 2008 only
				If($global:Server2008)
				{
					If($Setting.TurnMenuAnimationsOffState -ne "NotConfigured")
					{
						line 3 "HDX Broadcast\Visual Effects\Turn off menu animations: " $Setting.TurnMenuAnimationsOffState
						If($Setting.TurnMenuAnimationsOffState -eq "Enabled")
						{
							line 3 "HDX Broadcast\Visual Effects\Turn off menu animations\Turn Off Menu and Window Animations"
						}
					}
				}
				If($Setting.TurnWindowContentsOffState -ne "NotConfigured")
				{
					line 3 "HDX Broadcast\Visual Effects\Turn off window contents while dragging: " $Setting.TurnWindowContentsOffState
					If($Setting.TurnWindowContentsOffState -eq "Enabled")
					{
						line 3 "HDX Broadcast\Visual Effects\Turn off window contents while dragging\Turn Off Windows Contents While Dragging"
					}
				}
				If($Setting.SessionAudioState -ne "NotConfigured")
				{
					line 3 "Session Limits\Audio: " $Setting.SessionAudioState
					If($Setting.SessionAudioState -eq "Enabled")
					{
						line 3 "Session Limits\Audio\Limit (Kb/sec): " $Setting.SessionAudioLimit
					}
				}
				If($Setting.SessionClipboardState -ne "NotConfigured")
				{
					line 3 "Session Limits\Clipboard: " $Setting.SessionClipboardState
					If($Setting.SessionClipboardState -eq "Enabled")
					{
						line 3 "Session Limits\Clipboard\Limit (Kb/sec): " $Setting.SessionClipboardLimit
					}
				}
				If($Setting.SessionComportsState -ne "NotConfigured")
				{
					line 3 "Session Limits\COM Ports: " $Setting.SessionComportsState
					If($Setting.SessionComportsState -eq "Enabled")
					{
						line 3 "Session Limits\COM Ports\Limit (Kb/sec): " $Setting.SessionComportsLimit
					}
				}
				If($Setting.SessionDrivesState -ne "NotConfigured")
				{
					line 3 "Session Limits\Drives: " $Setting.SessionDrivesState
					If($Setting.SessionDrivesState -eq "Enabled")
					{
						line 3 "Session Limits\Drives\Limit (Kb/sec): " $Setting.SessionDrivesLimit
					}
				}
				If($Setting.SessionLptPortsState -ne "NotConfigured")
				{
					line 3 "Session Limits\LPT Ports: " $Setting.SessionLptPortsState
					If($Setting.SessionLptPortsState -eq "Enabled")
					{
						line 3 "Session Limits\LPT Ports\Limit (Kb/sec): " $Setting.SessionLptPortsLimit
					}
				}
				If($Setting.SessionOemChannelsState -ne "NotConfigured")
				{
					line 3 "Session Limits\OEM Virtual Channels: " $Setting.SessionOemChannelsState
					If($Setting.SessionOemChannelsState -eq "Enabled")
					{
						line 3 "Session Limits\OEM Virtual Channels\Limit (Kb/sec): " $Setting.SessionOemChannelsLimit
					}
				}
				If($Setting.SessionOverallState -ne "NotConfigured")
				{
					line 3 "Session Limits\Overall Session: " $Setting.SessionOverallState
					If($Setting.SessionOverallState -eq "Enabled")
					{
						line 3 "Session Limits\Overall Session\Limit (Kb/sec): " $Setting.SessionOverallLimit
					}
				}
				If($Setting.SessionPrinterBandwidthState -ne "NotConfigured")
				{
					line 3 "Session Limits\Printer: " $Setting.SessionPrinterBandwidthState
					If($Setting.SessionPrinterBandwidthState -eq "Enabled")
					{
						line 3 "Session Limits\Printer\Limit (Kb/sec): " $Setting.SessionPrinterBandwidthLimit
					}
				}
				If($Setting.SessionTwainRedirectionState -ne "NotConfigured")
				{
					line 3 "Session Limits\TWAIN Redirection: " $Setting.SessionTwainRedirectionState
					If($Setting.SessionTwainRedirectionState -eq "Enabled")
					{
						line 3 "Session Limits\TWAIN Redirection\Limit (Kb/sec): " $Setting.SessionTwainRedirectionLimit
					}
				}

				#Session Limits % Server 2008 only
				If($global:Server2008)
				{
					If($Setting.SessionAudioPercentState -ne "NotConfigured")
					{
						line 3 'Session Limits (%)\Audio: ' $Setting.SessionAudioPercentState
						If($Setting.SessionAudioPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\Audio\Limit (%): ' $Setting.SessionAudioPercentLimit
						}
					}
					If($Setting.SessionClipboardPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\Clipboard: " $Setting.SessionClipboardPercentState
						If($Setting.SessionClipboardPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\Clipboard\Limit (%): ' $Setting.SessionClipboardPercentLimit
						}
					}
					If($Setting.SessionComportsPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\COM Ports: " $Setting.SessionComportsPercentState
						If($Setting.SessionComportsPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\COM Ports\Limit (%): ' $Setting.SessionComportsPercentLimit
						}
					}
					If($Setting.SessionDrivesPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\Drives: " $Setting.SessionDrivesPercentState
						If($Setting.SessionDrivesPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\Drives\Limit (%): ' $Setting.SessionDrivesPercentLimit
						}
					}
					If($Setting.SessionLptPortsPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\LPT Ports: " $Setting.SessionLptPortsPercentState
						If($Setting.SessionLptPortsPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\LPT Ports\Limit (%): ' $Setting.SessionLptPortsPercentLimit
						}
					}
					If($Setting.SessionOemChannelsPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\OEM Virtual Channels: " $Setting.SessionOemChannelsPercentState
						If($Setting.SessionOemChannelsPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\OEM Virtual Channels\Limit (%): ' $Setting.SessionOemChannelsPercentLimit
						}
					}
					If($Setting.SessionPrinterPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\Printer: " $Setting.SessionPrinterPercentState
						If($Setting.SessionPrinterPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\Printer\Limit (%): ' $Setting.SessionPrinterPercentLimit
						}
					}
					If($Setting.SessionTwainRedirectionPercentState -ne "NotConfigured")
					{
						line 3 "Session Limits (%)\TWAIN Redirection: " $Setting.SessionTwainRedirectionPercentState
						If($Setting.SessionTwainRedirectionPercentState -eq "Enabled")
						{
							line 3 'Session Limits (%)\TWAIN Redirection\Limit (%): ' $Setting.SessionTwainRedirectionPercentLimit
						}
					}
				}

				#HDX Plug-n-Play
				If($Setting.ClientMicrophonesState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Audio\Microphones: " $Setting.ClientMicrophonesState
					If($Setting.ClientMicrophonesState -eq "Enabled")
					{
						If($Setting.ClientMicrophonesAreUsed)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Audio\Microphones\Use client microphones for audio input"
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Client Resources\Audio\Microphones\Do not use client microphones for audio input"
						}
					}
				}
				If($Setting.ClientSoundQualityState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Sound quality: " $Setting.ClientSoundQualityState
					If($Setting.ClientSoundQualityState)
					{
						line 3 "HDX Plug-n-Play\Client Resources\Sound quality\Maximum allowable client audio quality: " $Setting.ClientSoundQualityLevel
					}
				}
				If($Setting.TurnClientAudioMappingOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Turn off speakers: " $Setting.TurnClientAudioMappingOffState
					If($Setting.TurnClientAudioMappingOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Turn off speakers\Turn off audio mapping to client speakers"
					}
				}
				If($Setting.ClientDrivesState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Drives\Connection: " $Setting.ClientDrivesState
					If($Setting.ClientDrivesState -eq "Enabled")
					{
						If($Setting.ClientDrivesAreConnected)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Connection\Connect Client Drives at Logon"
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Connection\Do Not Connect Client Drives at Logon"
						}
					}
				}
				If($Setting.ClientDriveMappingState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Drives\Mappings: " $Setting.ClientDriveMappingState
					If($Setting.ClientDriveMappingState -eq "Enabled")
					{
						If($Setting.TurnFloppyDriveMappingOff)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Mappings\Turn off Floppy disk drives"
						}
						If($Setting.TurnHardDriveMappingOff)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Mappings\Turn off Hard drives"
						}
						If($Setting.TurnCDRomDriveMappingOff)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Mappings\Turn off CD-ROM drives"
						}
						If($Setting.TurnRemoteDriveMappingOff)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Mappings\Turn off Remote drives"
						}
					}
				}
				If($Setting.ClientAsynchronousWritesState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Drives\Optimize\Asynchronous writes: " $Settings.ClientAsynchronousWritesState
					If($Settings.ClientAsynchronousWritesState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Drives\Optimize\Asynchronous writes\Turn on asynchronous disk writes to client disks"
					}

					If($global:Server2008)
					{
						line 3 "HDX Plug-n-Play\Client Resources\Drives\Special folder redirection: " $Setting.TurnSpecialFolderRedirectionOffState
						If($Setting.TurnSpecialFolderRedirectionOffState -eq "Enabled")
						{
							line 3 "HDX Plug-n-Play\Client Resources\Drives\Special folder redirection\Do not allow special folder redirection"
						}
					}
				}

				If($Setting.TurnComPortsOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Ports\Turn off COM ports: " $Setting.TurnComPortsOffState
					If($Setting.TurnComPortsOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Ports\Turn off COM ports\Turn off client COM ports"
					}
				}
				If($Setting.TurnLptPortsOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Ports\Turn off LPT ports: " $Setting.TurnLptPortsOffState
					If($Setting.TurnLptPortsOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Ports\Turn off LPT ports\Turn off client LPT ports"
					}
				}
				If($Setting.TurnVirtualComPortMappingOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\PDA Devices\Turn on automatic virtual COM port mapping: " $Setting.TurnVirtualComPortMappingOffState
					If($Setting.TurnVirtualComPortMappingOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\PDA Devices\Turn on automatic virtual COM port mapping\Turn on virtual COM port mapping"
					}
				}
				If($Setting.TwainRedirectionState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Other\Configure TWAIN redirection: " $Setting.TwainRedirectionState
					If($Setting.TwainRedirectionState -eq "Enabled")
					{
						If($Setting.TwainRedirectionAllowed)
						{
							line 3 "HDX Plug-n-Play\Client Resources\Other\Configure TWAIN redirection\Allow TWAIN redirection"
							If($Setting.TwainRedirectionImageCompression -eq "NoCompression")
							{
								line 3 "HDX Plug-n-Play\Client Resources\Other\Configure TWAIN redirection\Allow TWAIN redirection\Do not use lossy compression for high color images"
							}
							Else
							{
								line 3 "HDX Plug-n-Play\Client Resources\Other\Configure TWAIN redirection\Allow TWAIN redirection\Use lossy compression for high color images: " $Setting.TwainRedirectionImageCompression
							}
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Client Resources\Other\Configure TWAIN redirection\Allow TWAIN redirection\Do not allow TWAIN redirection"
						}
					}
				}
				If($Setting.TurnClipboardMappingOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Other\Turn off clipboard mapping: " $Setting.TurnClipboardMappingOffState
					If($Setting.TurnClipboardMappingOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Other\Turn off clipboard mapping\Turn Off Client Clipboard Mapping"
					}
				}
				If($Setting.TurnOemVirtualChannelsOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Resources\Other\Turn off OEM virtual channels: " $Setting.TurnOemVirtualChannelsOffState
					If($Setting.TurnOemVirtualChannelsOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Resources\Other\Turn off OEM virtual channels\Turn Off OEM Virtual Channels"
					}
				}

				If($Setting.TurnAutoClientUpdateOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Client Maintenance\Turn off auto client update: " $Setting.TurnAutoClientUpdateOffState
					If($Setting.TurnAutoClientUpdateOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Client Maintenance\Turn off auto client update\Turn Off Auto Client Update"
					}
				}
				If($Setting.ClientPrinterAutoCreationState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Client Printers\Auto-creation: " $Setting.ClientPrinterAutoCreationState
					If($Setting.ClientPrinterAutoCreationState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Printing\Client Printers\Auto-creation\When connecting " $Setting.ClientPrinterAutoCreationOption
					}
				}

				If($Setting.LegacyClientPrintersState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Client Printers\Legacy client printers: " $Setting.LegacyClientPrintersState
					If($Setting.LegacyClientPrintersState -eq "Enabled")
					{
						If($Setting.LegacyClientPrintersDynamic)
						{
							line 3 "HDX Plug-n-Play\Printing\Client Printers\Legacy client printers\Create dynamic session-private client printers"
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Printing\Client Printers\Legacy client printers\Create old-style client printers"
						}
					}
				}
				If($Setting.PrinterPropertiesRetentionState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Client Printers\Printer properties retention: " $Setting.PrinterPropertiesRetentionState
					If($Setting.PrinterPropertiesRetentionState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Printing\Client Printers\Printer properties retention\Printer properties should be " $Setting.PrinterPropertiesRetentionOption
					}
				}
				If($Setting.PrinterJobRoutingState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Client Printers\Print job routing: " $Setting.PrinterJobRoutingState
					If($Setting.PrinterJobRoutingState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Printing\Client Printers\Print job routing\For client printers on a network printer server: " -NoNewLine
						If($Setting.PrinterJobRoutingDirect)
						{
							line 0 "Connect directly to network print server if possible"
						}
						Else
						{
							line 0 "Always connect indirectly as a client printer"
						}
					}
				}
				If($Setting.TurnClientPrinterMappingOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Client Printers\Turn off client printer mapping: " $Setting.TurnClientPrinterMappingOffState
					If($Setting.TurnClientPrinterMappingOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Printing\Client Printers\Turn off client printer mapping\Turn off client printer mapping"
					}
				}
				If($Setting.DriverAutoInstallState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Drivers\Native printer driver auto-install: " $Setting.DriverAutoInstallState
					If($Setting.DriverAutoInstallState -eq "Enabled")
					{
						If($Setting.DriverAutoInstallAsNeeded)
						{
							line 3 "HDX Plug-n-Play\Printing\Drivers\Native printer driver auto-install\Install Windows native drivers as needed"
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Printing\Drivers\Native printer driver auto-install\Do not automatically install drivers"
						}
					}
				}
				If($Setting.UniversalDriverState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Drivers\Universal driver: " $Setting.UniversalDriverState
					If($Setting.UniversalDriverState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Printing\Drivers\Universal driver\When auto-creating client printers: " $Setting.UniversalDriverOption
					}
				}
				If($Setting.SessionPrintersState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Printing\Session printers\Session printers: " $Setting.SessionPrintersState
					If($Setting.SessionPrintersState -eq "Enabled")
					{
						If($Setting.SessionPrinterList)
						{
							line 3 "HDX Plug-n-Play\Printing\Session printers\Session printers\Network printers to connect at logon:"
							ForEach($Printer in $Setting.SessionPrinterList)
							{
								Line 7 $Printer
							}
						}
						line 3 "HDX Plug-n-Play\Printing\Session printers\Client's default printer: " -NoNewLine
						If($Setting.SessionPrinterDefaultOption -eq "SetToPrinterIndex")
						{
							line 0 $Setting.SessionPrinterList[$Setting.SessionPrinterDefaultIndex]
						}
						Else
						{
							line 0 $Setting.SessionPrinterDefaultOption
						}
					}
				}
				If($Setting.ContentRedirectionState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Content Redirection\Server to client: " $Setting.ContentRedirectionState
					If($Setting.ContentRedirectionState -eq "Enabled")
					{
						If($Setting.ContentRedirectionIsUsed)
						{
							line 3 "HDX Plug-n-Play\Content Redirection\Server to client\Use Content Redirection from server to client"
						}
						Else
						{
							line 3 "HDX Plug-n-Play\Content Redirection\Server to client\Do not use Content Redirection from server to client"
						}
					}
				}
				If($Setting.TurnClientLocalTimeEstimationOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Time Zones\Do not estimate local time for legacy clients: " $Setting.TurnClientLocalTimeEstimationOffState
					If($Setting.TurnClientLocalTimeEstimationOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Time Zones\Do not estimate local time for legacy clients\Do Not Estimate Client Local Time"
					}
				}
				If($Setting.TurnClientLocalTimeEstimationOffState -ne "NotConfigured")
				{
					line 3 "HDX Plug-n-Play\Time Zones\Do not use Client's local time: " $Setting.TurnClientLocalTimeOffState
					If($Setting.TurnClientLocalTimeOffState -eq "Enabled")
					{
						line 3 "HDX Plug-n-Play\Time Zones\Do not use Client's local time\Do Not Use Client's Local Time"
					}
				}

				#User Workspace
				If($Setting.ConcurrentSessionsState -ne "NotConfigured")
				{
					line 3 "User Workspace\Connections\Limit total concurrent sessions: " $Setting.ConcurrentSessionsState
					If($Setting.ConcurrentSessionsState -eq "Enabled")
					{
						line 3 "User Workspace\Connections\Limit total concurrent sessions\Limit: " $Setting.ConcurrentSessionsLimit
					}
				}
				If($Setting.ZonePreferenceAndFailoverState -ne "NotConfigured")
				{
					line 3 "User Workspace\Connections\Zone preference and failover: " $Setting.ZonePreferenceAndFailoverState
					If($Setting.ZonePreferenceAndFailoverState -eq "Enabled")
					{
						line 3 "User Workspace\Connections\Zone preference and failover\Zone preference settings:"
						ForEach($Pref in $Setting.ZonePreferences)
						{
							line 7 $Pref
						}
					}
				}
				If($Setting.ShadowingState -ne "NotConfigured")
				{
					line 3 "User Workspace\Shadowing\Configuration: " $Setting.ShadowingState
					If($Setting.ShadowingState -eq "Enabled")
					{
						If($Setting.ShadowingAllowed)
						{
							line 3 "User Workspace\Shadowing\Configuration\Allow Shadowing"
							line 3 "User Workspace\Shadowing\Configuration\Prohibit Being Shadowed Without Notification: " $Setting.ShadowingProhibitedWithoutNotification
							line 3 "User Workspace\Shadowing\Configuration\Prohibit Remote Input When Being Shadowed: " $Setting.ShadowingRemoteInputProhibited
						}
						Else
						{
							line 3 "User Workspace\Shadowing\Configuration\Do Not Allow Shadowing"
						}
					}
				}
				If($Setting.ShadowingPermissionsState -ne "NotConfigured")
				{
					line 3 "User Workspace\Shadowing\Permissions: " $Setting.ShadowingPermissionsState
					If($Setting.ShadowingPermissionsState -eq "Enabled")
					{
						If($Setting.ShadowingAccountsAllowed)
						{
							line 3 "User Workspace\Shadowing\Permissions\Accounts allowed to shadow:"
							ForEach($Allowed in $Setting.ShadowingAccountsAllowed)
							{
								line 7 $Allowed
							}
						}
						If($Setting.ShadowingAccountsDenied)
						{
							line 3 "User Workspace\Shadowing\Permissions\Accounts denied from shadowing:"
							ForEach($Denied in $Setting.ShadowingAccountsDenied)
							{
								line 7 $Denied
							}
						}
					}
				}
				If($Setting.CentralCredentialStoreState -ne "NotConfigured")
				{
					line 3 "User Workspace\Single Sign-On\Central Credential Store: " $Setting.CentralCredentialStoreState
					If($Setting.CentralCredentialStoreState -eq "Enabled")
					{
						If($Setting.CentralCredentialStorePath)
						{
							line 3 "User Workspace\Single Sign-On\Central Credential Store\UNC path of Central Credential Store: " $Setting.CentralCredentialStorePath
						}
						Else
						{
							line 3 "User Workspace\Single Sign-On\Central Credential Store\No UNC path to Central Credential Store entered"
						}
					}
				}
				If($Setting.TurnPasswordManagerOffState -ne "NotConfigured")
				{
					line 3 "User Workspace\Single Sign-On\Do not use Citrix Password Manager: " $Setting.TurnPasswordManagerOffState
					If($Setting.TurnPasswordManagerOffState -eq "Enabled")
					{
						line 3 "User Workspace\Single Sign-On\Do not use Citrix Password Manager\Do not use Citrix Password Manager"
					}
				}
				If($Setting.StreamingDeliveryProtocolState -ne "NotConfigured")
				{
					line 3 "User Workspace\Streamed Applications\Configure delivery protocol: " $Setting.StreamingDeliveryProtocolState
					If($Setting.StreamingDeliveryProtocolState -eq "Enabled")
					{
						line 3 "User Workspace\Streamed Applications\Configure delivery protocol\Streaming Delivery Protocol option: " $Setting.StreamingDeliveryOption
					}
				}

				#Security
				If($Setting.SecureIcaEncriptionState -ne "NotConfigured")
				{
					line 3 "Security\Encryption\SecureICA encryption: " $Setting.SecureIcaEncriptionState
					If($Setting.SecureIcaEncriptionState -eq "Enabled")
					{
						line 3 "Security\Encryption\SecureICA encryption\Encryption level: " $Setting.SecureIcaEncriptionLevel
					}
				}

				#Service Level (2008 only)
				If($global:Server2008)
				{
					If($Setting.SecureIcaEncriptionState -ne "NotConfigured")
					{
						line 3 "Service Level\Session Importance: " $Setting.SessionImportanceState
						If($Setting.SessionImportanceState -eq "Enabled")
						{
							line 3 "Service Level\Session Importance\Importance level: " $Setting.SessionImportanceLevel
						}
					}
				}
			}
		}
		Else
		{
			Line 2 "Unable to retrieve settings"
		}

		write-output $global:output
		$global:output = $null
		$Settings = $null
		$Filter = $null
	}
}
Else
{
	line 0 "Citrix Policy information could not be retrieved."
}
$Policies = $null
$global:output = $null

 

Sample script output from XA503:

Policies:

		Policy Name: Sample Policy
				Description:
				Enabled: True
				Priority: 1
				Policy Filters:
						Allowed Server Folders:
								Servers
				Policy Settings:
						HDX 3D\Progressive Display\Progressive Display: Enabled
						HDX 3D\Progressive Display\Progressive Display\Compression level: HighCompression
						HDX 3D\Progressive Display\Progressive Display\Compression level\Restrict compression to connections under this bandwidth: True
						HDX 3D\Progressive Display\Progressive Display\Compression level\Restrict compression to connections under this bandwidth\Threshhold (Kb/sec): 64
						HDX 3D\Progressive Display\Progressive Display\SpeedScreen Progressive Display compression level: UltrahighCompression
						HDX 3D\Progressive Display\Progressive Display\Restrict compression to connections under this bandwidth: True
						HDX 3D\Progressive Display\Progressive Display\Restrict compression to connections under this bandwidth\Threshhold (Kb/sec): 512
						HDX 3D\Progressive Display\Progressive Display\Use Heavyweight compression (extra CPU, retains quality): True
						HDX Broadcast\Visual Effects\Turn off desktop wallpaper: Enabled
						HDX Broadcast\Visual Effects\Turn off desktop wallpaper\Turn Off Desktop Wallpaper
						HDX Broadcast\Visual Effects\Turn off window contents while dragging: Enabled
						HDX Broadcast\Visual Effects\Turn off window contents while dragging\Turn Off Windows Contents While Dragging
						HDX Plug-n-Play\Printing\Client Printers\Auto-creation: Enabled
						HDX Plug-n-Play\Printing\Client Printers\Auto-creation\When connecting DoNotAutoCreate
						HDX Plug-n-Play\Printing\Client Printers\Legacy client printers: Disabled
						HDX Plug-n-Play\Printing\Drivers\Native printer driver auto-install: Enabled
						HDX Plug-n-Play\Printing\Drivers\Native printer driver auto-install\Do not automatically install drivers
						HDX Plug-n-Play\Printing\Drivers\Universal driver: Enabled
						HDX Plug-n-Play\Printing\Drivers\Universal driver\When auto-creating client printers: ExclusiveOnly
						HDX Plug-n-Play\Printing\Session printers\Session printers: Enabled
						HDX Plug-n-Play\Printing\Session printers\Client's default printer: SetToClientMainPrinter
						User Workspace\Connections\Limit total concurrent sessions: Enabled
						User Workspace\Connections\Limit total concurrent sessions\Limit: 2
						User Workspace\Shadowing\Configuration: Enabled
						User Workspace\Shadowing\Configuration\Allow Shadowing
						User Workspace\Shadowing\Configuration\Prohibit Being Shadowed Without Notification: False
						User Workspace\Shadowing\Configuration\Prohibit Remote Input When Being Shadowed: False
						User Workspace\Single Sign-On\Do not use Citrix Password Manager: Enabled
						User Workspace\Single Sign-On\Do not use Citrix Password Manager\Do not use Citrix Password Manager
						Security\Encryption\SecureICA encryption: Enabled
						Security\Encryption\SecureICA encryption\Encryption level: Bits128

Sample script output from XA508:

Policies:

    Policy Name: Settings that apply to 2008 only
        Description:
        Enabled: True
        Priority: 1
        Policy Filters:
            Allowed Server Folders:
                Servers
        Policy Settings:
            HDX Broadcast\Visual Effects\Turn off menu animations: Enabled
            HDX Broadcast\Visual Effects\Turn off menu animations\Turn Off Menu and Window Animations
            Session Limits (%)\Audio: Enabled
            Session Limits (%)\Audio\Limit (%): 1
            Session Limits (%)\Clipboard: Enabled
            Session Limits (%)\Clipboard\Limit (%): 2
            Session Limits (%)\COM Ports: Enabled
            Session Limits (%)\COM Ports\Limit (%): 3
            Session Limits (%)\Drives: Enabled
            Session Limits (%)\Drives\Limit (%): 4
            Session Limits (%)\LPT Ports: Enabled
            Session Limits (%)\LPT Ports\Limit (%): 5
            Session Limits (%)\OEM Virtual Channels: Enabled
            Session Limits (%)\OEM Virtual Channels\Limit (%): 6
            Session Limits (%)\Printer: Enabled
            Session Limits (%)\Printer\Limit (%): 7
            Session Limits (%)\TWAIN Redirection: Enabled
            Session Limits (%)\TWAIN Redirection\Limit (%): 8
            HDX Plug-n-Play\Client Resources\Drives\Connection: Enabled
            HDX Plug-n-Play\Client Resources\Drives\Connection\Connect Client Drives at Logon
            HDX Plug-n-Play\Client Resources\Drives\Mappings: Enabled

Next, list the printer drivers available in the farm.

$PrinterDrivers = Get-XAPrinterDriver -EA 0 | sort-object DriverName

If( $? -and $PrinterDrivers)
{
	line 0 ""
	line 0 "Print Drivers:"
	ForEach($PrinterDriver in $PrinterDrivers)
	{
		line 1 "Driver : " $PrinterDriver.DriverName
		line 1 "Platform: " $PrinterDriver.OSVersion
		line 1 "64 bit? : " $PrinterDriver.Is64Bit
		line 0 ""
	}
	write-output $global:output
	$global:output = $null
}
Else
{
	line 0 "Printer driver information could not be retrieved"
}

$PrintDrivers = $null
$global:output = $null

 

Sample script output from XA503:

Print Drivers:

		Driver : Citrix Universal Printer
		Platform: 5.2
		64 bit? : False

		Driver : Citrix Universal Printer
		Platform: 5.2
		64 bit? : True

		Driver : Generic / Text Only
		Platform: 5.2
		64 bit? : False

		Driver : HP Color LaserJet 4500
		Platform: 5.2
		64 bit? : True

		Driver : HP Color LaserJet 4500
		Platform: 5.2
		64 bit? : False

		Driver : HP Color LaserJet PS
		Platform: 5.2
		64 bit? : False

		Driver : HP Color LaserJet PS
		Platform: 5.2
		64 bit? : True

		Driver : HP LaserJet Series II
		Platform: 5.2
		64 bit? : False

		Driver : HP LaserJet Series II
		Platform: 5.2
		64 bit? : True

		Driver : Microsoft XPS Document Writer
		Platform: 5.2
		64 bit? : True

		Driver : Microsoft XPS Document Writer
		Platform: 5.2
		64 bit? : False

Next, list the print driver mappings.

$PrinterDriverMappings = Get-XAPrinterDriverMapping -EA 0 | sort-object ClientDriverName

If( $? -and $PrinterDriverMappings)
{
	line 0 ""
	line 0 "Print Driver Mappings:"
	ForEach($PrinterDriverMapping in $PrinterDriverMappings)
	{
		line 1 "Client Driver: " $PrinterDriverMapping.ClientDriverName
		line 1 "Server Driver: " $PrinterDriverMapping.ServerDriverName
		line 1 "Platform: " $PrintDriverMapping.OSVersion
		line 1 "64 bit? : " $PrinterDriverMapping.Is64Bit
		line 0 ""
	}
	write-output $global:output
	$global:output = $null
}
Else
{
	line 0 "Printer driver mapping information could not be retrieved"
}

$PrintDriverMappings = $null
$global:output = $null

 

Sample script output from XA503:

Print Driver Mappings:

		Client Driver: Brother Something or Other
		Server Driver: HP Color LaserJet 4500
		Platform:
		64 bit? : False

Even though it is not a separate node in either the DSC or AMC, Citrix does provide a way to get the Configuration Log report.

Originally I had this set so that the $ConnectionString parameters would need to be manually set. It wasn’t until I was writing this article that I realized the flaw in my thinking. Since I also provide a signed copy of the script, manually changing the script is impossible. If the signed copy of the script is altered, the script is no longer valid and will not run. The way around this dilemma is to use a UDL file. For an explanation, see http://tinyurl.com/CreateUDLFile.

The UDL file will need to be placed in the same folder as this script. The UDL file will need to be named XA5ConfigLog.udl. You will need to edit the UDL file and add;Password=ConfigLogDatabasePassword to the end of the last line in the file. For example, here is mine (the line is one line):

Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=administrator;Initial Catalog=XA6ConfigLog;Data Source=SQL;Password=abcd1234

If( $Global:ConfigLog)
{
	#Configuration Logging report
	#only process if $Global:ConfigLog = $True and .\XA5ConfigLog.udl file exists
	#build connection string for Microsoft SQL Server
	#User ID is account that has access permission for the configuration logging database
	#Initial Catalog is the name of the Configuration Logging SQL Database
	If ( Test-Path .\XA5ConfigLog.udl )
	{
		$ConnectionString = Get-Content .\xa5configlog.udl | select-object -last 1
		$ConfigLogReport = get-XAConfigurationLog -connectionstring $ConnectionString -EA 0

		If( $? -and $ConfigLogReport)
		{
			line 0 ""
			line 0 "Configuration Log Report:"
			ForEach($ConfigLogItem in $ConfigLogReport)
			{
				line 0 ""
				Line 1 "Date: " $ConfigLogItem.Date
				Line 1 "Account: " $ConfigLogItem.Account
				Line 1 "Change description: " $ConfigLogItem.Description
				Line 1 "Type of change: " $ConfigLogItem.TaskType
				Line 1 "Type of item: " $ConfigLogItem.ItemType
				Line 1 "Name of item: " $ConfigLogItem.ItemName
			}
			Write-Output $global:output
			$global:output = $null
		}
		Else
		{
			line 0 "Configuration log report could not be retrieved"
		}
		Write-Output $global:output
		$ConfigLogReport = $null
		$global:output = $null
	}
	Else
	{
		line 0 "XA5ConfigLog.udl file was not found"
	}
}

 

Sample script output from XA503:

Configuration Log Report:

		Date: 09/30/2011 21:44:20
		Account: WEBSTERSLAB\Administrator
		Change description: Settings for Configuration Logging were initialized.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52003

		Date: 09/30/2011 22:14:50
		Account: WEBSTERSLAB\Administrator
		Change description: Server XA520032 was installed.
		Type of change: Created
		Type of item: Server
		Name of item: XA520032

		Date: 09/30/2011 22:14:50
		Account: WEBSTERSLAB\Administrator
		Change description: Server XA520031 was installed.
		Type of change: Created
		Type of item: Server
		Name of item: XA520031

		Date: 10/01/2011 14:56:14
		Account: WEBSTERSLAB\administrator
		Change description: Administrator WEBSTERSLAB\bshell was added.
		Type of change: Created
		Type of item: User
		Name of item: WEBSTERSLAB\bshell

		Date: 10/01/2011 14:57:21
		Account: WEBSTERSLAB\administrator
		Change description: Administrator WEBSTERSLAB\cwebster was added.
		Type of change: Created
		Type of item: User
		Name of item: WEBSTERSLAB\cwebster

		Date: 10/01/2011 14:59:18
		Account: WEBSTERSLAB\administrator
		Change description: Application Notepad was published.
		Type of change: Created
		Type of item: Application
		Name of item: Notepad

Sample script output from XA508:

Configuration Log Report:

		Date: 10/01/2011 15:06:25
		Account: WEBSTERSLAB\administrator
		Change description: Settings for Configuration Logging were updated.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52008

		Date: 10/01/2011 15:07:26
		Account: WEBSTERSLAB\administrator
		Change description: Citrix XML Service DNS address resolution was modified for farm XA52008.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52008

		Date: 10/01/2011 15:07:26
		Account: WEBSTERSLAB\administrator
		Change description: 280202
		Type of change: Modified
		Type of item: 20
		Name of item: XA52008

		Date: 10/01/2011 15:07:26
		Account: WEBSTERSLAB\administrator
		Change description: Log Rade Events was modified for farm XA52008.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52008

		Date: 10/01/2011 15:07:26
		Account: WEBSTERSLAB\administrator
		Change description: Farm settings were modified for XA52008.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52008

		Date: 10/01/2011 15:07:26
		Account: WEBSTERSLAB\administrator
		Change description: Connection Limits per user were modified for farm XA52008.
		Type of change: Modified
		Type of item: Farm
		Name of item: XA52008

How to use this script?

I saved the script as XA5_Inventory.ps1 in the Z:\ folder. From the PowerShell prompt, change to the Z:\ folder, or the folder where you saved the script. From the PowerShell prompt, type in:

.\XA5_Inventory.ps1 |out-file .\XA5Farm.txt

Open XA5Farm.txt in either WordPad or Microsoft Word (Figure 28).

The first update I have planned for this script is to implement generating the output in Word format. This will allow for using Word Headings and formatting. If you have any suggestions for the script, please let me know. Send an e-mail to webster@carlwebster.com.

NOTE: This script is continually updated.  You can always find the most current version by going to https://carlwebster.com/where-to-get-copies-of-the-documentation-scripts/