Carl Webster Accessibility Statement

Carl Webster is committed to facilitating the accessibility and usability of its website, carlwebster.com, for everyone. Carl Webster aims to comply with all applicable standards, including the World Wide Web Consortium’s Web Content Accessibility Guidelines 2.0 up to Level AA (WCAG 2.0 AA). Carl Webster is proud of the efforts that we have completed and that are in-progress to ensure that our website is accessible to everyone.

If you experience any difficulty in accessing any part of this website, please feel free to email us at info@carlwebster.com and we will work with you to provide the information or service you seek through an alternate communication method that is accessible for you consistent with applicable law (for example, through telephone support).

  • 04 Building Webster’s Lab V2 – Initial VMware ESXi Host Configuration

    May 27, 2021

    VMware

    [Updated 8-Nov-2021]

    Now that the ESXi 7.0 host installation is complete, it is time for the initial host configuration. In this article, you complete the following steps:

    When we completed the ESXi 7.0 installation and the host rebooted, the host was at the screen shown in Figure 1.

    Figure 1
    Figure 1

    Using the Host’s IPMI, press F2, as shown in Figure 2.

    Figure 2
    Figure 2

    Enter the Password for root and press Enter, as shown in Figure 3.

    Figure 3
    Figure 3

    Use the down arrow key, select Configure Management Network, and press Enter, as shown in Figure 4.

    Figure 4
    Figure 4

    Use the down arrow key, select IPv4 Configuration, and press Enter, as shown in Figure 5.

    Figure 5
    Figure 5

    Use the down arrow key, highlight Set static IPv4 address and net configuration and press the spacebar as shown in Figure 6.

    Figure 6
    Figure 6

    Press the down arrow, enter the appropriate IPv4 information, and press Enter, as shown in Figure 7.

    Figure 7
    Figure 7

    Press the down arrow, highlight DNS Configuration, and press Enter, as shown in Figure 8.

    Figure 8
    Figure 8

    Enter your Primary and Alternate DNS Servers, type in a Hostname, and press Enter, as shown in Figure 9. Currently, there is no Active Directory domain, domain controller of DNS. I am using my router’s DNS.

    Note: The ESXi installer gives each host the hostname of “localhost”. In Microsoft Windows, localhost has a specific use. Each ESXi host requires a unique Hostname (as does each Microsoft Windows computer account in Active Directory).

    Figure 9
    Figure 9

    Press Esc, then press Y to apply the changes and restart the management network, as shown in Figure 10.

    Figure 10
    Figure 10

    Note: Abdullah Abdullah recommends running Test Management Network before continuing. ESXi then performs the following tests:

    • Pings the subnet gateway specified
    • Pings the primary DNS server specified
    • Pings the alternate DNS server specified
    • Resolves the hostname of the ESXi host

    Use the down arrow key, select Troubleshooting Options, and press Enter, as shown in Figure 11.

    Figure 11
    Figure 11

    To install the VAAI Plug-in for Synology NFS support, SSH is required to use PuTTY (or your preferred SSH client) to install the necessary drivers and plug-ins.

    Note: ESXi 7.0 does not include the VAAI Plug-in for the Synology NAS.

    Use the down arrow key, highlight Enable SSH, and press Enter, as shown in Figures 12 and 13.

    Figure 12
    Figure 12
    Figure 13
    Figure 13

    Press ESC twice to return to the main ESXi host screen, as shown back in Figure 1.

    Now, you need to install the VAAI Plug-in for NFS. Go to https://global.download.synology.com/download/Tools/NFSVAAIPlugin/1.2-1008/VMware_ESXi/synology-nfs-vaai-plugin-1.2-1008.vib and download the VIB NFS Plug-in for VMware VAAI for your Synology NAS model.

    Note: If the download link has changed, go to https://www.synology.com and search for “nfs vaai plugin”. A user account on synology.com is not required to download the VIB file.

    Note: VIB stands for vSphere Installation Bundle. At a conceptual level, a VIB is somewhat similar to a ZIP archive in that it is a collection of files packaged into a single archive to facilitate distribution.

    Using your favorite secure upload utility, I used WinSCP, upload the VAAI plug-in to the /tmp directory on the ESXi host.

    First, connect to the ESXi host, as shown in Figure 14.

    Figure 14
    Figure 14

    If this is the first time connecting to the host, a key exchange is required. If you want to add the server’s host key to the secure upload utility’s cache, click Yes, as shown in Figure 15.

    You can connect without adding the server’s host key to the secure upload utility’s cache. Click No if you do not wish to save the server’s host key in the cache.

    Figure 15
    Figure 15

    In WinSCP, there are three ways to upload the VIB file to the ESXi host.

    1. Drag and Drop the VIB file from the left pane to the right pane, as shown in Figure 18.
    2. Select the VIB file in the left pane, press F5, and click OK, as shown in Figure 16.
    3. Select the VIB file in the left pane, right-click, select Upload, as shown in Figure 17, and click OK, as shown in Figure 16.
    Figure 16
    Figure 16
    Figure 17
    Figure 17

    Using your preferred upload method, copy the VIB file to the /tmp directory on the ESXi host, as shown in Figure 18.

    Figure 18
    Figure 18

    Exit your favorite secure upload utility.

    Using your favorite SSH client, connect to the ESXi host, as shown in Figure 19. I used PuTTY.

    Figure 19
    Figure 19

    Note: I only tested PuTTY. I did not try using the SSH client from Windows 10.

    If this is the first time connecting to the host, a key exchange is required. If you want to add the host’s key to the SSH client’s cache, click Yes, as shown in Figure 20.

    You can connect without adding the host’s key to the SSH client’s cache. Click No if you do not wish to save the host’s key in the cache.

    Figure 20
    Figure 20

    Log in to the host using your configured credentials. If you just installed ESXi, log in as root and the password used during the ESXi install, as shown in Figure 21.

    Figure 21
    Figure 21

    Run the following command, as shown in Figure 22.

    esxcli software vib install -v /tmp/synology-nfs-vaai-plugin-1.2-1008.vib –no-sig-check

    Figure 22
    Figure 22

    Reboot the ESXi host by typing reboot and pressing Enter, as shown in Figure 23.

    Figure 23
    Figure 23

    Once the host is up, use your SSH client to verify the VAAI plug-in installation. Run the following command, as shown in Figure 24.

    esxcli software vib list | grep nfs

    Figure 24
    Figure 24

    Now that the host has its initial configuration complete, the rest uses the HTML5 client.

    Up next: VMware ESXi Host Configuration.

    Landing page for the article series







    About Carl Webster

    Carl Webster is an independent consultant specializing in Citrix, Active Directory, and technical documentation. Carl (aka “Webster”) serves the broader Citrix community by writing articles (see CarlWebster.com) and by being the most active person in the Citrix Zone on Experts Exchange. Webster has a long history in the IT industry beginning with mainframes in 1977, PCs and application development in 1986, and network engineering in 2001. He has worked with Citrix products since 1990 with the premiere of their first product – the MULTIUSER OS/2.

    View all posts by Carl Webster

    2 Responses to “04 Building Webster’s Lab V2 – Initial VMware ESXi Host Configuration”

    1. Chris David Says:

      I haven’t even done the work yet and I can tell this is going to be a great help. I’m just doing the prep work before starting the upgrades

      Reply

    Leave a Reply