Carl Webster Accessibility Statement

Carl Webster is committed to facilitating the accessibility and usability of its website, carlwebster.com, for everyone. Carl Webster aims to comply with all applicable standards, including the World Wide Web Consortium’s Web Content Accessibility Guidelines 2.0 up to Level AA (WCAG 2.0 AA). Carl Webster is proud of the efforts that we have completed and that are in-progress to ensure that our website is accessible to everyone.

If you experience any difficulty in accessing any part of this website, please feel free to email us at info@carlwebster.com and we will work with you to provide the information or service you seek through an alternate communication method that is accessible for you consistent with applicable law (for example, through telephone support).

  • Citrix Provisioning Services, Bluecat DHCP Appliance and PXE-E32: TFTP Open Timeout Error

    January 9, 2014

    PVS

    At a recent XenDesktop and PVS project we ran into an issue where even though DHCP Options 66 and 67 were configured, we could not get rid of the PXE-E32: TFTP open timeout error.  This short article describes the resolution.

    This project was for XenDesktop 7.1 and PVS 7.1 using Bluecat DHCP/DNS appliances.  There are a couple of search hits that mention this specific issue with Bluecat DHCP where DHCP Option 66 is never returned in the DHCP Offer packet.  We made sure of the following:

    • All PVS servers had the correct IP addresses, subnet mask and gateway
    • The boot configuration file in both PVS sites was configured with the correct subnet mask
    • The VLAN was configured with the right subnet mask
    • DHCP was configured with the right subnet mask and gateway
    • DHCP Options 66 and 67 were configured correctly

    We did find some subnet misconfiguration issues and all subnet masks were corrected.  We then reran the PVS Configuration Wizard and make sure the correct subnet mask was used for the boot configuration information.  But we still received the PXE-E32: TFTP open timeout error.

    We then installed Wireshark on the PVS server used for Option 66.  After receiving the timeout, we stopped the Wireshark capture and analyzed the DHCP packets.  What we noticed was that there was no Option 66 in the DHCP Offer packets.  DHCP Option 67 was there but without Option 66 the target device had no IP Address to go to for Option 67.  The customer placed a support call to Bluecat and found out that the Bluecat DHCP appliances do not support Option 66 or Option 67.  Bluecat has their own proprietary options that act like Options 66 and 67.  Once the proprietary options were set on the Bluecat DHCP appliance, the PXE-E32: TFTP open timeout error was gone, the target device received the proper information for the TFTP Server and boot file and the project was able to proceed.

    Unfortunately the Bluecat support knowledgebase is behind a paid login so you will not find this information anywhere.  I hope this short post will help others out there looking to resolve the missing DHCP Option 66 offer when a Bluecat DHCP appliance is used.

     

    UPDATE 10-Jan-2014: The customer gave me permission to include the settings that need to be set on the Bluecat DHCP appliance.  These are not DHCP Options, just fields on the Bluecat:

    • Nextserver
    • Filename

     

    Thanks

    Webster

    , , ,





    About Carl Webster

    Webster is a Sr. Solutions Architect for Choice Solutions, LLC and specializes in Citrix, Active Directory and Technical Documentation. Webster has been working with Citrix products for many years starting with Multi-User OS/2 in 1990.

    View all posts by Carl Webster

    4 Responses to “Citrix Provisioning Services, Bluecat DHCP Appliance and PXE-E32: TFTP Open Timeout Error”

    1. Michael Says:

      Carl,
      Great story but you have got it a bit mixed up: the problem is that BlueCat DHCP *does* support option 66.

      The Wireshark capture would have come from a working environment with Microsoft DHCP. When you configure option 66 on a Microsoft DHCP server, the Microsoft server never sends DHCP option 66. DHCP option 66 would have been missing in the packet capture. When you configure option 66, a Microsoft DHCP server will send the server IP address in the next-server field of the DHCP header instead, and this is what most clients expect.

      The conclusion is the same: with BlueCat DHCP you need to use the Next Server option, instead of configuring DHCP option 66.

      Michael.

      Reply

      • Carl Webster Says:

        At the time the article was written and for the version of BlueCat DHCP appliance the customer used, there was no Option 66. BlueCat support verified it and told us what to use.

        Webster

        Reply

    2. Rajan Says:

      Hi Carl,

      I am having same related issue kind with PXE
      PXE E53 boot file was not received

      this comes when im about to convert the target device into the vdisk converstion

      Also if you can post PVS using Boot Device Manager that would be really grateful for us

      Reply

    3. Citrix24 Says:

      Carl,
      Thank you for sharing this post. This will help me a lot.

      Regards
      Andrzej

      Reply

    Leave a Reply